A Bradford company - serving Summerlin, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Dvele · Summerlin

Dvele Fence Installation in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A garage converted into a guest room and home office
A finished backyard cottage with a small covered porch
A remodeled staircase with wood treads and a slim metal railing
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Fence Installation: The Summerlin Owner’s Guide

Fence installation for a Dvele home in Summerlin typically runs $3,500 to $9,000 installed, depending on fence type, linear footage, and whether the property sits on a slope in the foothills. We handle Dvele-compatible fences as an independent contractor, not affiliated with Dvele, and we give you a written price before any work starts. Most owners start noticing trouble the same way: a gate that drags on a summer afternoon, posts that lean after a wind event, or pickets that have gone chalky and gray within two seasons.

professional painters applying fresh paint to walls during home remodeling project in Summerlin, NV

Call (844) 588-0072

Summerlin sits at 2,900 to 3,400 feet on the west edge of the valley, and that matters for a fence. Intense UV, low humidity, and the temperature swing between a 105-degree July day and a 60-degree night push materials harder than most of the country. A fence that looks fine on install day can show its real quality within 18 months.

Which Dvele Models This Applies To

A second-story addition that matches the existing roofline

Dvele builds prefab modular homes, and the exterior package varies by model line and by the options chosen at the time of order. That means there is no single “Dvele fence spec” we can quote from memory. Some Dvele properties were delivered with a standard perimeter package: vinyl privacy panels on 4×4 posts set in concrete, aluminum view fence on the property-line side, and a driveway gate on the approach. Others were finished later by the original site contractor, and the fence materials don’t match what Dvele showed in the plan set.

The first thing we do on a Summerlin estimate is measure. We pull actual post spacing (typically 6 feet on center for vinyl and aluminum, sometimes 8 feet on a Dvele-installed run), check post embedment depth, and confirm gate hardware size. That measurement is the whole game. A gate that’s ordered to the wrong post spacing won’t hang right no matter how good the hinges are.

On the OEM vs. aftermarket question: Dvele doesn’t manufacture fence material. What they spec is a supplier product, usually a name-brand vinyl or aluminum system carried regionally. That means you’re not locked into a proprietary part. You’re matching a spec: panel width, color code, rail profile, and post cap style. In most Summerlin cases we can source an exact or near-exact match from the same regional supplier family. Where a close match isn’t available, we document the substitution in writing before ordering, so you know exactly what’s going on the property.

If your property includes cabinetry or surfaces inside the house, the same documentation standard applies. We install KraftMaid, Cambria, and Silestone among our documented brand roster, and every line item gets written down the same way whether it’s a fence panel or a cabinet run.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Fence Installation Is Failing

A fence doesn’t fail all at once. It fails in stages, and the early signs are easy to miss because the fence still “holds” from a distance. Here’s what to look for:

  • Posts leaning after wind or irrigation. The cause is usually shallow embedment or saturated soil from a drip line running alongside the fence. In Summerlin, irrigation lines and fence lines frequently run parallel in the same trench, and a post that never got below the frost-free depth will walk outward over three or four seasons. Once a post leans, the panel pulls against the neighboring posts, and the whole run starts going.
  • Gate sagging and dragging on the ground. Hinge screws back out, or the gate frame itself has warped. On a Dvele-installed gate, the usual culprit is a hinge pattern anchored into a hollow vinyl post with no internal reinforcement. Screws that once held tight now spin. A sagging gate is the most common call we get on a Summerlin fence.
  • Vinyl panels chalky, yellowing, or brittle. UV degradation. The desert sun is unforgiving, and a lower-grade vinyl panel that looks fine at install can surface-crack at stress points (post connections, rail notches) within a few years. Brittle vinyl cracks rather than flexes, and once one panel goes, the next one usually isn’t far behind.
  • Pickets or rails cracking at fastener points. Stress concentration at the screws, combined with thermal expansion on a 40-plus degree daily swing. The fastener holds the panel rigid while the rest of it tries to move, and the plastic fails at the screw hole.
  • Aluminum panels rattling or rails pulling loose. Typically a failed fastener or a rail that was never fully seated at install. On view fence along a slope, the rails rack and pull out of the post channels, and once a rail pops out, the panel is only held by gravity.

If you’re seeing two or more of these on the same run, the fence is past touch-up territory. It’s replacement time.

Replacement Cost & What’s Included

In Summerlin, Dvele-compatible fence installation runs $3,500 to $9,000 installed. Vinyl fence installation lands in the $3,500 to $9,000 range and aluminum fence installation in the $4,000 to $10,000 range; the number moves based on linear footage, height, gate count, slope work, and whether we’re removing the old fence.

professional painters applying fresh paint to walls during home remodeling project in Summerlin, NV

Here’s what drives the number up:

  • Linear footage. The biggest single variable. A standard residential perimeter is 120 to 200 feet; a larger Summerlin lot will run higher.
  • Slope. Foothill lots in the Ridges and Red Rock areas need racked panels or stepped sections. Stepped runs cost more labor, racked panels cost more material.
  • Removal and disposal. Old concrete-set posts have to come out, not just get cut at grade.
  • Gates. Driveway gates and pedestrian gates are separate line items with their own hardware.

Every Bradford estimate is a written line-item price before work begins. The number on the page is the number you pay, and it doesn’t move at the door. The 365-Day Done Right Promise covers the completed installation for a full year; if it fails within that window, we come back and correct it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some checks are safe for a homeowner. You can walk the fence line, test every post by hand, run a level along the top rail, look for cracks or chalking, and confirm that gate hardware is tight.

The installation itself is a different animal. Posts set in concrete need proper embedment depth for stability, and in the Las Vegas Valley that depth is deeper than what you’ll find on most internet instructions. Slope work requires racking or stepping panels so the fence follows the grade without gaps at the bottom. And a fence that leans or fails isn’t just unsightly; on a property line it’s a liability issue, and a poorly-set post can come out in a windstorm and take a panel with it. Concrete-set post replacement also means busting out old footings, which is a tool-and-back job most owners don’t want.

If what you’re seeing is a single loose gate or one cracked panel, an honest check says call for a repair estimate before assuming replacement. If the run has two or more failing posts, it’s a replacement. Call (844) 588-0072 and we’ll give you a straight answer on which one it is.

FAQs

A room opened to the studs with new wiring and plumbing

Your Next Step

If your Dvele fence is showing its age in Summerlin, the right move is a written estimate on paper, no pressure, no surprises. We’re background-checked and uniformed on every job, a live person answers the phone 24/7, and every completed project carries the 365-Day Done Right Promise in writing. Call Bradford Remodeling Co Summerlin at (844) 588-0072 to schedule your free estimate.

Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay window

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch