







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Summerlin Owner’s Guide
We install Techo-Bloc bathroom remodeling in Summerlin with a written price before any work starts, and a complete bathroom remodel here typically runs $9,000 – $28,000 depending on tile coverage, drainage work, and whether we’re rebuilding a shower pan or leaving it intact. That’s the honest number, not a teaser. We don’t offer same-day installation because nobody should rush a wet area, but a live person answers the phone 24/7 and we’ll schedule your free estimate on your timeline.

Most Summerlin owners find us after a specific failure, not a vague “it’s time to remodel.” A shower floor that flexes underfoot. Grout that breeds a dark line along the perimeter no matter how often you scrub it. A groutable deck that popped loose three summers after install. The pattern in this valley is durable stone and porcelain set over a substrate that couldn’t handle the ground movement and heat swings, and the repair almost always starts at the layer nobody sees.
Key Takeaways
- Full bathroom remodel in Summerlin: $9,000 – $28,000 installed, written price up front.
- Summerlin’s expansive clay soils and 40-degree day-night temperature swings do more damage to tile and grout than any product defect.
- Every completed project carries the 365-Day Done Right Promise: if it fails inside a year, we return and correct it at no charge.
- We’re an independent service provider, not affiliated with Techo-Bloc. We install compatible materials to manufacturer spec.
Which Techo-Bloc Models This Applies To

Techo-Bloc’s bathroom surface line is a small corner of a catalog that’s mostly pavers and retaining walls, and that’s the first compatibility trap: the product a Summerlin homeowner wants for a shower floor is often a wall or patio product cut down for the job, which changes what adhesive and grout you can legally use over it. The product families that actually get installed in bathrooms are the porcelain and stone-look lines, the large-format slab-style pieces, and the groutable deck and paver formats some installers adapt to shower pans and niches.
To identify what you have, look for two things. First, a carton label, usually on a remnant in the garage or under a sink, showing the series name and a batch or lot code. Second, a physical measurement: Techo-Bloc sizes are nominal and calibrated to a metric or imperial standard, and an aftermarket look-alike that’s off by an eighth of an inch will leave a visible grout line that ruins a repeat-run pattern. Photograph the label and measure three pieces with a tape before you buy anything.
On the OEM-versus-aftermarket question, there’s a real answer for Summerlin. If you’re matching an existing floor or half-wall and need the exact series, sourcing through a Techo-Bloc dealer keeps color and calibration consistent with what’s already on the wall. If you’re replacing an entire field, a quality porcelain equivalent from a documented brand works fine, and we frequently pair Techo-Bloc with KraftMaid, Cambria, or Silestone surfaces so every specified material has a manufacturer spec sheet behind it. We don’t stock parts and we don’t carry inventory. We source to your sample, confirm lot numbers before the order ships, and hold the written price through install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
In Summerlin, the failure mode is almost never the tile itself. It’s what’s under it. Here’s how the breakdown usually announces itself:
- Hollow sound when you tap the floor. The thinset has debonded from the substrate, and the tile is now floating. Common cause is a substrate that moved after the tile cured, which is the norm over Summerlin’s expansive clay soils.
- A grout line that cracks in the same spot twice. A repeat crack traces to movement, either structural or a missing or failed membrane. Repointing it a third time without fixing the movement is a waste of money.
- Grout that won’t stay clean along a shower wall. Dark, persistent staining at the perimeter usually means moisture is wicking behind the grout line. Long-term that becomes a mold issue inside the wall cavity.
- Flex in a shower floor. If the floor gives under a bare foot, the pan or the substrate has failed. This is the one that needs attention soon.
- Lippage, or one tile edge sitting higher than its neighbor. Lippage over a sixteenth of an inch means the setting bed wasn’t flat or the tile is migrating. On a shower floor, lippage becomes a pooling problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Summerlin, a full Techo-Bloc-style bathroom remodel runs $9,000 – $28,000 installed. A small bathroom remodel lands at $5,000 – $12,000. If the job is the shower itself, a walk-in shower installation is $4,500 – $12,000, a shower replacement runs $3,000 – $8,500, and a tub-to-shower conversion is $3,500 – $10,000. A vanity installation alone runs $800 – $3,000.
What moves the number: how much square footage the stone covers, whether we’re pulling out a tub, whether the drain has to be relocated (a plumbing rough-in change), and whether the substrate needs a full float or a membrane over an existing slab. Parts and labor are on the same line, itemized. The written price you sign is the price you pay, with no numbers that move at the door. Every completed bathroom we hand back is covered by the 365-Day Done Right Promise: if the install fails within twelve months, we come back and correct it at no charge.
DIY or Call Us?
Some things are worth checking yourself before you call. Measure the tile, find the carton label, photograph the grout crack, and see whether the flex is underfoot or just in the grout. That’s information we need anyway, and it saves a diagnostic trip. What we don’t recommend is pulling a shower floor tile or resetting a pan yourself. Removing set tile without cracking the substrate or puncturing a waterproofing membrane is the part that goes wrong on DIY jobs, and a compromised pan means water inside the wall for years before you see it. The same goes for any rough-in plumbing change: that’s not a homeowner job.
If a tile is loose or the grout is cracking, call (844) 588-0072 for a free estimate. A background-checked, uniformed technician will inspect, tell you what’s actually failing, and hand you a written price before anyone touches a tile. A real person answers that line around the clock.
FAQs

A properly installed porcelain or stone surface lasts 20 to 30 years in a Summerlin bathroom; the failure point is normally the setting bed, not the tile. Expect a substrate with correct membrane and movement joints to outlast two rounds of grout. Call (844) 588-0072 for an assessment if you’re already seeing hollow spots or repeat cracks.
Sometimes, yes. A single cracked tile over a sound substrate can often be pulled and reset, and hairline grout cracks can be repointed if the movement is minor. If the substrate flexes, the waterproofing is compromised, or lippage is widespread, repair is a stopgap and the money is better spent on a correct rebuild. We’ll tell you which you’re looking at before you commit to a written price.
A shower replacement or tub-to-shower conversion typically takes one to two weeks of working days; a full bathroom remodel runs two to four weeks depending on tile coverage and whether plumbing moves. Weather doesn’t usually affect indoor work, but Summerlin’s dry heat does mean we’re careful about thinset and grout cure times, which affects the schedule honestly. Call (844) 588-0072 with your scope and we’ll give you a real timeline, not an optimistic one.
We source to your sample: bring the carton label or a trimmed remnant and we confirm series, color, and lot before ordering, then verify what arrives matches before install. We’re independent of Techo-Bloc, so we also price a compatible porcelain equivalent where that’s the better value. A written quote, itemized, comes before any order is placed. Call (844) 588-0072 to get that process started.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












