







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Summerlin Owner’s Guide
Home additions and ADU construction in Summerlin typically run $45,000 – $130,000 installed when the work involves Belgard hardscape and masonry elements – a range that covers everything from a single-room bump-out with a Belgard paver patio threshold to a full detached accessory dwelling unit with matching hardscape. We install Belgard-compatible additions across Summerlin and verify series fit before a single pallet is ordered. There’s no same-day swap here: an addition is planned, permitted construction, not a part replacement, and anyone telling you otherwise is selling you something that doesn’t exist.

Most Summerlin owners discover a problem the slow way. A paver border at the new room’s threshold starts rocking after two Las Vegas summers. A retaining wall course behind the addition shifts. The Belgard wall cap on the ADU entry spalls. By the time it’s obvious, the hardscape has already been load-bearing against the addition’s footings for a season or two.
Which Belgard Models This Applies To

Belgard’s hardscape lines matter here because additions and ADUs almost always tie into hardscape – a patio threshold, a walkway, a retaining wall, a step cap. The relevant series are Catalina (the most common paver in Summerlin yards), Urbana (stone-faced wall block), Mega-Libre and Dimension (larger-format slabs used on modern elevations), and Cambridge for cobble-style borders. Each has a different thickness tolerance and joint width, and that’s where mismatched parts fail.
To identify what you have, measure the actual paver or block. Catalina runs about 2⅜ inches thick; Mega-Libre runs thicker and has a distinct beveled edge. Look for a stamped or molded mark on the underside of a loose unit. If the addition was built more than a few years ago, the original series may have been discontinued or reformulated, and the “matching” unit sold today won’t sit flush with the older course.
OEM Belgard units are the right call when the addition is visible and you need a true series match. A quality aftermarket equivalent is acceptable for hidden work – a buried wall course, a drainage apron – where color fade and edge profile won’t be seen. We specify which is which in the written quote, and we’re an independent contractor, not affiliated with Belgard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
- Rocking pavers at the addition threshold. Base compaction failed, usually because the subgrade under the new hardscape wasn’t re-compacted after the footing pour. In Summerlin’s caliche-heavy soil, that shows up within one or two monsoon seasons.
- Wall caps that lift or spall. Freeze-thaw cycles in the higher Summerlin elevations, combined with the desert sun, work a cap loose when the adhesive was applied over a damp or dusty surface. Spalling means moisture got behind the cap.
- Visible settling or a low spot draining toward the addition. The retaining or grade transition wasn’t tied into the addition’s drainage plan, so water now runs toward the structure instead of away. That’s a footing issue, not a cosmetic one.
- Joint sand washing out after rain. Polymer sand that wasn’t properly activated, or was installed over a wet joint, erodes fast. You’ll see it as streaks of sand on the walkway after a storm.
- Color banding across the new and old hardscape. A mismatched series or a different production lot. Belgard color varies by run, and a faded Catalina from 2018 won’t match a fresh one pulled in 2026.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Correcting Belgard-related hardscape and structural tie-in work on a Summerlin addition falls into the $45,000 – $130,000 band when it’s part of a larger addition or ADU scope. Standalone repairs are quoted line by line – a paver threshold re-set, a wall cap replacement, a drainage correction – and the written price you get before any work starts is the price you pay at the door. No moving numbers.
What drives the range: square footage of hardscape being corrected, whether the addition’s footing or drainage has to be reworked, series availability (a discontinued Catalina run costs more to match than a current one), and whether permits are involved – Summerlin additions in the unincorporated county and Henderson sides can trigger different review paths.
| Line Item | Summerlin Price Range |
|---|---|
| Paver threshold or detail repair | $800 – $3,500 |
| Retaining wall course rebuild | $2,500 – $8,000 |
| Hardscape re-set tied to addition | $6,000 – $18,000 |
| Full addition (Belgard-integrated) | $45,000 – $130,000 |
| ADU construction (Belgard hardscape) | $90,000 – $220,000 |
Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. You get the signed written guarantee in your hand at close, along with a clean site and a documented scope.
DIY or Call Us?
You can safely check a few things yourself. Pop a loose paver up and inspect the base underneath – loose, sandy base means compaction failed. Look at the color stamp on an underside. Photograph water ponding after rain and note which direction it drains. Those observations help us quote accurately.
What you should not do yourself: pull a retaining wall course that’s holding grade against an addition footing, re-set a load-bearing step, or dig near the addition’s foundation to chase a drainage problem. In Summerlin’s caliche, a homeowner with a shovel and good intentions can undermine a footing or a buried utility in an afternoon. That work needs a trained crew, and a licensed one – background-checked, uniformed technicians who arrive identified and leave the site squared away. Call (844) 588-0072 and we’ll talk through what’s actually failing before anyone comes out.
FAQs

Properly installed, a Catalina paver surface lasts 25 – 30 years, and a Belgard wall system runs longer. The caveat in Summerlin is the base and the joint sand, not the unit – compaction failure and washed-out polymer sand are what shorten the life, and both show up within the first two or three summers if they were poorly done. Call (844) 588-0072 for an exact quote; estimates are free.
Often yes. A single rocking threshold, a spalled cap, or a failed joint sand run can be corrected without tearing out the whole surface. What can’t be repaired is a base that was never compacted – that has to come up. We tell you which case you’re in, in writing, before work starts.
A hardscape correction runs 1 – 3 days; a repair tied to an addition’s drainage or footing runs 3 – 7 days depending on scope. A full addition project is a planned, permitted build measured in weeks, not days – we don’t promise same-day on construction work, and no one should.
We source through documented Belgard distribution channels and verify the series and production lot against your existing hardscape before ordering. That’s how we catch a discontinued Catalina run before it’s delivered and doesn’t match. We don’t stock parts and we don’t carry them on a truck – every unit is ordered to spec. We also work with KraftMaid, Cambria, and Silestone on the interior side of the same addition. Call (844) 588-0072 for a written quote with the part and labor broken out line by line.
Ready for a straight answer on what’s failing and what it costs? Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate. A live person answers, day or night, and you’ll have a written price before any work starts.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












