







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Bathroom Remodeling: The Summerlin Owner’s Guide
Belgard bathroom remodeling in Summerlin runs $9,000 – $28,000 installed, with most full baths landing between $14,000 and $22,000. We install to Belgard specification with a written price before work starts and the 365-Day Done Right Promise behind the finished job. One honest note up front: Belgard is a hardscape and masonry brand (pavers, retaining wall block, fire features), not a bathroom fixture line. So this page is really about the cases where a Belgard product touches your Summerlin bathroom – a paver floor, a block accent, a masonry shower surround – and what it takes to get that material matched, priced, and reinstalled correctly when something under or around it fails.

Most Summerlin owners find the problem on a Saturday morning: a hairline crack tracking across a paver set in the bathroom floor, grout that keeps washing out at the shower curb, or a loose block on a half-wall that moved after a winter of temperature swings. The material isn’t defective. What’s underneath it, or how it was set, usually is.
Key Takeaways
- A full Belgard-compatible bathroom remodel in Summerlin typically costs $9,000 – $28,000; small baths run $5,000 – $12,000.
- Belgard makes hardscape, not plumbing – “Belgard bathroom” projects are paver floors, block accents, and masonry surrounds.
- We give you a written price before any tool comes out, and the 365-Day Done Right Promise covers the work for a full year.
- We’re an independent contractor, not affiliated with Belgard. We install to their specs and match materials by profile.
Which Belgard Models This Applies To

Belgard’s residential lines are the ones you’ll usually find in a Summerlin home: the Urbana and Catalina paver series for floor and accent work, the Belair and Brighton wall block lines for half-walls and niches, and their slab products for larger flat surfaces. Each series has fixed nominal dimensions and a set thickness (pavers commonly run 2 3/8″ to 2 3/4″ thick; wall block varies by unit), and that thickness is what determines how the floor or wall is built around it. Getting the unit right matters more than getting close, because a floor set for a 2 3/8″ paver won’t accept a 2 3/4″ unit without a substrate change.
To identify what you have, check the underside of a loose unit or the original project paperwork – Belgard stamps profile and series information on the back of most pavers. Measure thickness at the edge with a tape, not by eye. If the stamp is worn off, a photo of the face pattern plus the measured thickness is usually enough for us to match the profile.
On OEM versus aftermarket: Belgard pavers and block are sold as a proprietary profile, so the correct replacement is the same Belgard profile, color, and thickness. Aftermarket lookalikes rarely match face texture or color lot, and color varies between production runs – a fact worth checking before you buy. We don’t carry stock, and no parts ride on a truck; every unit is specified to your existing profile and sourced to match the color lot on your job. We also work the same way with KraftMaid, Cambria, and Silestone when a bath project mixes cabinet, surface, and masonry scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Bathroom Remodeling Is Failing
Here’s what a failing installation actually looks like, and what’s usually behind it.
- Grout or mortar washing out at the shower curb or floor edge. Water is getting behind the masonry, and the setting bed is breaking down. In Summerlin’s dry heat, the surface dries fast while moisture stays trapped below, so the failure hides until it’s spread.
- Loose or rocking pavers on the bathroom floor. The thin-set or mortar bed lost bond, often from deflection in the subfloor or from a unit set over an uneven surface. A rocking unit means the bond is already gone.
- Hairline cracks across paver faces or block. Usually substrate movement, not a material flaw – a floor that wasn’t prepped flat will telegraph movement up through the masonry.
- Efflorescence – white chalky bloom on the surface. Salt migrating out of the masonry as moisture moves through it. Common in bathrooms where a shower runs daily and ventilation is weak.
- Mismatched color where a prior repair was made. A patch used a different color lot or a lookalike unit. Visible color banding is the tell.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Summerlin, a full Belgard-compatible bathroom remodel runs $9,000 – $28,000. A small bathroom remodel runs $5,000 – $12,000. If the scope narrows to specific fixtures, a walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, a shower replacement $3,000 – $8,500, and a bathroom vanity installation $800 – $3,000.
The range is driven by what’s under the masonry: substrate repair, waterproofing, plumbing rough-in changes, and how much existing material can be salvaged versus reset. You get a written price before work starts, itemized by material and labor, with no numbers that move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails within the year, we return and correct it at no charge. Estimates are free – call (844) 588-0072 for yours.
DIY or Call Us?
Some checks are safe and worth doing. Look for loose units, photograph the stamped back of a paver, measure thickness at the edge, and note where water is pooling. That information helps us quote accurately.
Where DIY goes wrong is the part you can’t see. Resetting masonry over a wet substrate without fixing the moisture source just moves the failure a few inches; tearing out a shower surround without re-waterproofing the wall behind it sets up mold and a repeat failure within a season. And if the scope touches plumbing or electrical inside the wall, that’s licensed-trade work, full stop. Our technicians have up to 22 years of experience, are background-checked and uniformed, and a live person answers the phone 24/7. Call (844) 588-0072 and we’ll tell you honestly whether you need a repair or a rebuild.
FAQs

A correctly installed Belgard paver or block installation in a Summerlin bathroom lasts 20 to 30 years or more, provided the substrate and waterproofing are sound and the material is properly sealed. Our work is covered by the 365-Day Done Right Promise for the first year regardless. Call (844) 588-0072 for an exact quote.
Often yes. A single cracked paver or a loose block can usually be lifted and reset with a matching color-lot unit if the substrate underneath is intact. If several units are moving or water is getting behind the masonry, a partial rebuild is the honest fix. Call (844) 588-0072 and we’ll tell you which one you’re looking at.
A single-unit reset or localized repair is typically a half-day to one day. A full bathroom remodel with masonry scope runs one to three weeks depending on size and how much substrate work is needed. You get a written schedule with the written price before anything starts. Call (844) 588-0072 to book a free estimate.
We match Belgard profile, series, thickness, and color lot to your existing installation – not a lookalike from a different line – and specify it in the written scope so you can see exactly what’s being installed before work begins. We don’t carry stock; every unit is specified to your job. Call (844) 588-0072 to start the match.
Bradford Remodeling Co Summerlin gives you the written price before the first tool comes out, background-checked uniformed technicians, and the 365-Day Done Right Promise on the finished work. We’re an independent contractor, not affiliated with Belgard. Call (844) 588-0072 for your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












