







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Summerlin Owner’s Guide
Barrette kitchen remodeling in Summerlin typically runs $14,000 to $45,000 installed, depending on layout, cabinet line, and surface choices. That figure covers tear-out, framing corrections, cabinet and counter installation, and finish work, and it’s the number we put in writing before any tool comes out. Same-day installation is not how kitchen work happens; a real Summerlin kitchen takes planning, a written scope, and a crew that shows up when it says it will.

Most Summerlin owners don’t start with a brand name. They start with a symptom: a cabinet door that won’t stay closed in July, a drawer face swelling at the bottom edge, a counter seam opening up near the sink. In Summerlin’s low-humidity desert air, cabinet boxes dry out and shrink while the hardware stays put, and that’s where the gaps and rattles come from. The job is matching the right Barrette-compatible component to your actual cabinet line, not guessing at the home center shelf.
Key Takeaways
- Installed Barrette kitchen remodeling in Summerlin: $14,000 – $45,000, quoted in writing before work starts.
- Cabinet and hardware compatibility depends on your Barrette series, not just the door style.
- Every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge.
- Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Barrette.
Which Barrette Models This Applies To

Barrette cabinet lines are sold through dealer networks, and the model identity lives on a label inside the cabinet box, usually on the back panel or the inside face of a stile. That label carries the series name and a finish code. Pull a drawer out and look before you assume anything: two Barrette kitchens that look identical from the doorway can be different series with different box depths, hinge boring patterns, and door overlay specs. Getting the series wrong is the most common compatibility failure we see in Summerlin kitchens.
Here’s the checkable detail most owners miss: Barrette door and drawer fronts are drilled for specific hinge types, and a replacement door bored for a European concealed hinge will not line up with a face-frame cabinet built for a different hinge pattern. Measure the door overlay (how far the door edge laps the cabinet face frame) and the hinge cup bore distance before ordering anything. If your cabinet line is discontinued, a quality aftermarket front can be matched on dimensions and finish, and it will outperform a factory seconds piece. OEM is the safe path when the series is still produced; aftermarket is the practical path when it isn’t, provided the specs are measured, not eyeballed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
Summerlin kitchens give up in predictable ways. These are the five symptoms we get called about most, and what’s actually behind each one.
- Doors that won’t stay shut or swing open on their own. The hinge has lost tension or the mounting screws have pulled out of the stile. In older Summerlin builds, the screw holes in the particleboard stile strip out, and a larger screw or a repair plate buys you time but not a fix.
- Drawer faces sagging or scraping the frame. The drawer glide is worn or the box bottom is bowing. Undermount glides fail at the clip that holds the drawer to the rail, and once that clip cracks the drawer drops and drags.
- Cabinet doors and frames separating at the joints. Low indoor humidity pulls moisture out of the wood and the glue joints open. This is a Summerlin climate pattern, not a defect you caused.
- Counter seams opening near the sink or cooktop. Edge swelling at a cutout, or the substrate under the counter has shifted. Seams that open in the first year usually point to a substrate problem, not the surface material.
- Finish peeling or yellowing on the cabinet fronts. Sun exposure through west-facing Summerlin windows breaks down clear finishes faster than most owners expect. A finish failure on the doors is often the first sign the whole front set is due for replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing below is for Summerlin, installed, with a written line-item quote before work begins. No numbers that move at the door.
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel (Barrette cabinets) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number: cabinet box count, whether the layout changes (moving a sink or range means rough-in work), counter material, and whether the old kitchen comes out clean or fights you. The quote is line-item, so you see what the cabinets cost, what the counters cost, and what the labor costs. The work is covered by the 365-Day Done Right Promise, a written guarantee on the full project. If the install fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can check safely. Pull a drawer, read the label, measure door overlay and hinge bore, photograph the failing glide or hinge. Those are the facts anybody needs to price the job. What goes wrong is the install: cabinet boxes need level and plumb within a tolerance a tape measure won’t show you, counter substrate has to be flat or the seams open again, and a drawer glide installed a hair out of alignment eats itself in a year.
Nothing in this work carries the danger of, say, a garage-door spring, but a cabinet run that isn’t shimmed and anchored properly can come off the wall, and that’s a real risk not worth taking for a weekend. If you’re weighing it, call (844) 588-0072. We’ll tell you plainly whether the job is a repair or a replacement, and the estimate is free.
FAQs

A well-installed Barrette cabinet run realistically lasts 15 to 25 years, but Summerlin’s dry air and strong west-side sun shorten that on the finish side faster than the box side. Expect door and drawer fronts to show finish wear before the cabinet boxes fail structurally. Call (844) 588-0072 for a straight read on your specific set.
Often yes for hardware. Hinges, glides, and drawer clips are replaceable and a matching part fixes the symptom quickly. Structural failures, like a cabinet stile that’s lost its screw grip or a counter seam that’s opened twice, are the point where repair money is better spent on replacement. Call (844) 588-0072 and we’ll say which one you’re looking at.
Hardware swaps are a short day. A cabinet installation runs two to four days for a typical Summerlin kitchen, and a full remodel with counter and backsplash runs two to four weeks. We give you the schedule in writing with the price, and we don’t move it without telling you.
We identify your Barrette series from the cabinet label, confirm the specs, and source through documented brand channels. We don’t claim to stock parts or carry them on a truck; we order what your kitchen actually needs and show you the spec. For the rest of the kitchen we work from a documented brand roster including KraftMaid, Cambria, and Silestone, so everything is traceable.
Give us a call at (844) 588-0072 for a free estimate on your Summerlin kitchen. A live person answers, day or night, and you’ll have a written price before any work starts.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












