A Bradford company - serving Summerlin, NV
An open living room and dining area after a whole-home remodel
T
Therma-Tru · Summerlin

Therma-Tru Roofing in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Roofing: The Summerlin Owner’s Guide

Therma-Tru does not manufacture roofing, and that distinction matters before you spend a dollar. Therma-Tru builds fiberglass and steel entry doors, patio doors, and the components that seal them – thresholds, sills, weatherstripping, sweeps, and the flashing and trim details where a door head meets a wall or roofline. What homeowners in Summerlin call “Therma-Tru roofing” is almost always the door-to-roof transition: the head flashing, drip cap, and exterior trim around a Therma-Tru door that sits under an eave, a porch roof, or a second-story overhang. Work on that transition is a roofer’s job with a door brand’s parts spec.

professional home remodeling service in Summerlin, NV

Call (844) 588-0072

Installed, correcting a failed Therma-Tru door-to-roof transition in Summerlin runs $400-$1,800 depending on how much trim and flashing gets replaced and whether the door itself was damaged. Full roof replacement, where that transition is part of the scope, runs $8,000-$20,000. Owners usually find the problem the same way: a water stain on the ceiling inside, bubbling paint on the door head, or a wet threshold after a monsoon push. Call (844) 588-0072 and a live person answers, day or night.

Which Therma-Tru Door Lines This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Therma-Tru’s residential lines – Fiber-Classic, Smooth-Star, Classic-Craft, and the steel Profiles and Reliabilt-labeled doors – all use the same family of sill and threshold heights, but the exterior trim and head detailing around them varies by how the door was installed. A Fiber-Classic entry door set in a stucco wall on a Summerlin house needs different flashing detail than a Smooth-Star patio door under a covered lanai. The part number you need follows the door, not the roof.

Identify your door before you call: the Therma-Tru label sits on the hinge jamb or the top of the door slab, and it carries the model line and the door slab dimensions. Measure the rough opening width and height, not the slab. Then measure the head flashing width you need – it should extend past the door frame by 2 inches on each side to shed water clear of the jamb. Therma-Tru’s factory flashing and trim components are spec’d to the door line; a generic aluminum drip cap from a big-box aisle will fit, but it won’t match the mill finish or the profile of the original.

The OEM-versus-aftermarket decision comes down to two things: whether the door is under warranty and whether the trim is visible. Therma-Tru’s limited warranty covers the door system, not the roofing detail a contractor wrapped around it, so a quality aftermarket flashing kit from a known manufacturer is a reasonable call when the original profile is discontinued. For visible trim that a buyer will see from the street, source the Therma-Tru-matched component.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Door-to-Roof Transition Is Failing

What fails first, in our experience in Summerlin, is the sealant at the flashing lap and the caulk joint where trim meets stucco. Summerlin summers push 115°F on a south-facing wall, and the elastomeric caulk breaks down in five to seven years on a sun-exposed head, faster than the flashing metal itself ever will.

  • Water staining on the ceiling just inside the door. The head flashing isn’t lapping over the trim correctly, so water gets behind the trim and tracks down the wall cavity instead of shedding off the face.
  • Paint bubbling or peeling on the door head or upper jamb. Moisture is trapped behind the exterior trim. Bubble at the head means the flashing lap is wrong; bubble at the sill means the threshold pan is holding water.
  • Daylight visible at the top corners of the door. The head flashing has pulled away or the trim has shrunk, and the weather seal has lost contact. This one shows up as a draft before it shows up as a leak.
  • Staining or mineral crust on the stucco below the door head. Water is running down the wall face instead of off the flashing. In Summerlin’s low-humidity climate the stain dries fast and gets missed for a season or two.
  • Wet threshold or wet flooring after a rain. The sill pan or threshold isn’t draining. On a Therma-Tru adjustable sill, the drain slots can clog with stucco dust and windblown grit.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A freestanding soaking tub in a remodeled primary bathroom

Here’s the honest Summerlin range. A flashing and trim repair at the door head, with new sealant and matched trim, runs $400-$1,800. That’s the Roof Repair band, and it covers the small jobs where the door and the roof are both sound. If the roof above the door has failed and the transition is just the visible symptom, the number moves to $8,000-$20,000 for a roof replacement – tile or shingle, with the door head detailed correctly as part of the scope.

What drives the range: how much stucco gets opened to reach the flashing, whether the trim is a stock profile or a custom mill, and whether the door’s weather seal and threshold need replacement at the same time. Our written price lists the flashing, the trim, the sealant, the labor, and the disposal as separate lines before any work starts. Every completed job carries the 365-Day Done Right Promise – a written guarantee for a full year, and if the repair fails inside that window, we come back and correct it at no charge. Estimates are free.

DIY or Call Us?

You can safely do three things. Look at the ceiling inside the door after a rain for stains. Run a hand along the door head trim and feel for soft wood or loose trim. Check the label on the hinge jamb for the Therma-Tru model line. Write down what you find.

Where DIY goes wrong is the flashing. Re-caulking a failed head flashing without correcting the lap makes the leak worse, because you seal water in behind the trim instead of letting it shed. And on a second-story door or a door under a steep eave, getting up there to work the flashing is fall work – that’s not a ladder job for a homeowner, it’s a trained technician’s job with fall protection. Door and roof components also carry structural loads; a flashing detail that’s under-secured will fail in the first monsoon. If you’ve got water inside, call us at (844) 588-0072 and we’ll look at it with you.

FAQs

A second-story addition that matches the existing roofline

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA walk-in pantry with wood shelvingA finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in shower

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch