







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Summerlin Owner’s Guide
We install and repair Mr-Glass driveway and paver systems in Summerlin, and a full paver driveway replacement here runs $7,000 – $18,000 installed, while a sealing or joint-repair visit to a failing edge lands far lower at $250 – $700. If you already own Mr-Glass hardscape product and a section has shifted, heaved, or lost its joint sand, we can usually schedule an assessment within a few days and quote the fix in writing before any work starts. Owners typically notice the problem after a monsoon-season rain: a paver course by the garage apron is sitting a quarter-inch proud, water is pooling against the block wall, or the polymeric sand has washed out of a joint line and a ridge of silt is left on the slab. Once one course moves, the ones beside it follow within a season.

Which Mr-Glass Models This Applies To

Mr-Glass sells its driveway and paver systems through set product lines rather than a single universal block, so the first job is matching what you already have. Look for the stamped or etched mark on the underside of a loose paver, the spec sheet stapled inside the original delivery packaging, or a model code on the delivery invoice. The common failure in Summerlin is ordering a “close enough” paver from a generic catalog: the thickness and chamfer look right, but the joint tolerance runs narrower than the Mr-Glass line, and the new course never locks to the old one. Thickness matters most. A paver spec’d at 60mm won’t carry a driveway load the way an 80mm unit will, and mixing the two in one field is how you get a differential settlement crack four months later.
On OEM versus aftermarket, here’s the honest split. A genuine Mr-Glass replacement paver keeps the color lot, texture, and joint dimension consistent, which matters on a visible driveway. A quality aftermarket equivalent from a documented manufacturer can work for edge restraints, base aggregate, and joint sand, where the spec is generic and Mr-Glass doesn’t make the material itself. We won’t pass off a generic block as a Mr-Glass match. If the color lot is discontinued, we tell you that up front and show you the closest documented match before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
Paver systems fail from the base up, not the top down, so the symptom you see is usually the last thing to go wrong. Here’s what to look for in Summerlin:
- Heaving or a rocking paver. Water got under the unit and froze or expanded the base course. In Summerlin’s caliche-heavy soil, poor drainage is almost always the culprit.
- Washed-out joints. Polymeric sand is missing between pavers, leaving gaps that channel water straight to the base. This is the single most common call we get after a heavy rain.
- Sunken or uneven courses. A section has settled below the surrounding field, usually from an under-compacted base or a failed edge restraint letting pavers creep outward.
- Efflorescence (white chalky haze). Salts migrating to the surface from moisture trapped in the base. It can be a cosmetic one-off, but recurring haze means water is entering and not draining.
- Cracked or chipped pavers at the driveway apron. Vehicle load concentrated where the driveway meets the street, often from a thin base at that transition. This is where a failing system announces itself first.
If two or more of these are showing at once, the base is involved and a top-dressing won’t hold. A single rocking paver can be re-set; a field of them needs the base addressed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work actually costs in Summerlin, quoted as a written range before any tool comes out:
| Scope | Installed Price Range |
|---|---|
| Full paver driveway installation / replacement | $7,000 – $18,000 |
| Driveway replacement (mixed or concrete-to-paver) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What moves the number: total square footage, whether the base is rebuilt or just re-leveled, edge restraint replacement, and access (a tight Summerlin driveway with a block wall on both sides slows haul-off and adds labor). The range is parts plus labor, itemized. We don’t quote one number and reprice it at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.

DIY or Call Us?
Some of this you can check safely yourself. Walk the driveway and note which pavers rock underfoot, look for missing joint sand, and photograph the low spots where water pools. That information helps us quote accurately. What we don’t recommend as DIY is re-setting a failing field or rebuilding the base. Lifting pavers is heavy, repetitive work, and a base that isn’t compacted to the right depth with the right aggregate will settle again within one rainy season. Cutting pavers without proper respiratory protection is a stone-dust hazard, and re-doing a joint line with the wrong sand ratio is the most common way a homeowner turns a $300 repair into a full re-lay.
On the Mr-Glass side specifically, installing a paver system over an existing failed base without addressing the substrate just moves the failure forward. That’s the repair we get called back to fix most often. Call (844) 588-0072 for a written estimate; we’ll tell you honestly whether it’s a repair or a replacement.
FAQs

A properly installed paver driveway with a well-compacted base and maintained joints typically lasts 25 to 30 years or more. In Summerlin’s climate, the limiting factor is usually the joint sand and drainage, not the paver itself; keeping joints filled and water draining away from the slab is what gets you the full lifespan. Call (844) 588-0072 for an assessment.
Yes, if the failure is localized. A single rocking paver or one washed-out joint line can be lifted, re-based, and re-set at a fraction of replacement cost. If the base has failed across a whole field or the edge restraint is gone, repair won’t hold and replacement is the honest answer. We tell you which one it is after we look.
A joint-and-restraint repair is usually a one-day job. A full driveway re-lay in Summerlin runs two to four days depending on square footage and whether the base is rebuilt; the base cure and compaction add the most time. We give you the timeline in writing with the price.
We identify your specific Mr-Glass line from the stamp, spec sheet, or invoice, then match the replacement to that line’s thickness and joint tolerance. We work from a documented roster of name-brand hardscape materials, including Belgard, and where the Mr-Glass color lot is discontinued we show you the documented closest match before ordering. We don’t claim to stock Mr-Glass parts on a truck; sourcing is matched to your product and confirmed with you in writing.
We also install and service KraftMaid, Cambria, and Silestone products when a driveway or patio project ties into a broader home remodel. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Mr-Glass.
Call (844) 588-0072 for a free estimate. A live person answers, day or night, and you’ll get a written price before any work starts.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












