







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Summerlin Owner’s Guide
Bathroom remodeling built around Mr-Glass shower and tub enclosures in Summerlin typically runs $9,000 to $28,000 installed, depending on the shower footprint, tile, and whether we’re converting a tub. We’re an independent contractor, not affiliated with Mr-Glass, and we work from a written price before any work starts. Most Summerlin owners discover the problem the same way: the enclosure glass starts to haze at the bottom edge, the door scrapes the frame through its swing, or the seal fails and water creeps under the track after every shower. What looked like a cleaning issue turns out to be a failing seal, sagging hinge, or substrate that’s been quietly soaking for a year.

Key Takeaways
- Full bathroom remodel in Summerlin: $9,000 to $28,000. Small bath: $5,000 to $12,000.
- Mr-Glass enclosures are a glass and hardware system, so the real failure is usually the seal, hinge, or substrate behind them, not the glass itself.
- Every project gets a written price before work begins and the 365-Day Done Right Promise, a full-year written guarantee.
- Call (844) 588-0072 for a free estimate. A live person answers.
Which Mr-Glass Models This Applies To

Mr-Glass builds framed and frameless shower enclosures, tub enclosures, and sliding and pivot door systems, and the model tag is usually on the header, the door jamb, or the inside of the frame channel. Pull that tag before you call anyone. Frameless units use thicker tempered glass, typically 3/8 inch or 1/2 inch, while framed and semi-frameless units run thinner panels inside a metal channel. That difference matters because hinge and clip hardware is not interchangeable between them, and a door hung on the wrong bracket will bind, chip the glass edge, and stress the substrate.
Measure the opening height, width, and glass thickness so the replacement or repair matches the original spec. The OEM-versus-aftermarket call for Mr-Glass comes down to hardware: OEM seals and hinges fit the exact extrusion profile, while quality aftermarket equivalents often cost 20 to 40 percent less but only work if the profile matches. When the glass itself is sound and only the seal, sweep, or hinge has failed, a matched aftermarket part is a fair choice. When the frame or door is out of square, we replace the assembly rather than force a part that will fail again. We don’t stock parts and don’t carry them on a truck; we source to your model.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- Water pooling outside the shower curb. The door sweep or bottom seal has flattened or pulled loose, so water tracks under the frame instead of back into the pan. In Summerlin’s dry heat, rubber sweeps harden and crack faster than in humid climates.
- The door scrapes or won’t stay closed. A sagging hinge or worn pivot has let the door drop, and it’s now riding on the frame. Left alone, the glass edge chips and the hinge pulls out of the tile.
- Hazy or cloudy glass at the bottom edge. That’s mineral and soap film trapped where the seal has failed, and sometimes early hard-water etching on the glass surface itself. Clark County’s water runs hard, so buildup is common.
- Loose or crumbling tile at the shower base. Water has gotten behind the enclosure and into the substrate or backer board. This is the one to catch early, because the repair cost climbs once framing is wet.
- Mildew along the caulk line that keeps coming back. Recaulking over a wet substrate traps moisture and the spot returns within weeks. The seal is failing and the wall behind it needs to dry out before it’s closed up again.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what bathroom work around a Mr-Glass enclosure runs in Summerlin, installed, in writing:
| Scope | Installed price range |
|---|---|
| Full bathroom remodel | $9,000 to $28,000 |
| Small bathroom remodel | $5,000 to $12,000 |
| Walk-in shower installation | $4,500 to $12,000 |
| Tub-to-shower conversion | $3,500 to $10,000 |
| Shower replacement | $3,000 to $8,500 |
| Bathroom vanity installation | $800 to $3,000 |
The range is driven by shower footprint, tile selection, glass thickness and hardware, and whether we’re repairing a wet substrate. We price parts and labor as separate line items so you can see exactly what the enclosure hardware costs against the installation. Most shower-only replacements land in the lower half of the range; a full gut with a wet-substrate repair pushes toward the top. All completed work carries the 365-Day Done Right Promise, a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: look for standing water outside the curb, check that the door swing is clear and the hinge screws are snug, feel the caulk line for soft spots, and confirm the model tag for a parts match. What goes wrong beyond that is substrate work. Pulling an enclosure to fix a leaking pan means cutting into the shower wall, assessing how far the moisture spread, and rebuilding the waterproofing behind it. Get that wrong and you’ve sealed moisture into the wall, which is a much bigger bill than the original leak. Tempered glass is heavy and can shatter if a hinge is loaded wrong, and the framing carries real weight, so a two-person installation isn’t optional. We handle the enclosure, the substrate, and the finish as one job.
Call (844) 588-0072 for a free estimate. We’ll bring the written price and a clear scope before any tool comes out.
FAQs

Glass itself can last decades if it’s not chipped, but the seals, sweeps, and hinges typically wear in five to ten years, faster in Summerlin’s dry heat, which hardens rubber and dries out caulk. Full enclosure replacement is usually on a ten-to-fifteen-year rhythm for a well-used master bath. Call (844) 588-0072 for an exact assessment; estimates are free.
Often yes. If the glass is sound and only the sweep, seal, or a hinge has failed, a matched part repair is cheaper and faster than a full swap. It can’t be repaired once the glass edge is chipped or the frame is out of square. Call (844) 588-0072 and we’ll tell you straight which side of that line your enclosure is on. Estimates are free.
A shower-only replacement typically runs one to two working days for the enclosure itself, and a full bathroom remodel runs two to four weeks depending on tile and substrate scope. A seal or hinge repair is often a same-visit fix. The written scope tells you the estimate up front. Call (844) 588-0072 to schedule your free estimate.
We work from your model tag and measurements, then source the matched OEM hardware or a verified aftermarket equivalent that fits the exact extrusion profile. We don’t stock parts or carry them on a truck, so nothing arrives that hasn’t been checked against your spec. Call (844) 588-0072 and have the tag number ready.
We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side of your Summerlin remodel, plus a documented roster of premium brands so every spec is traceable. Bradford Remodeling Co Summerlin is part of the Garrison Partners family and is held to The Garrison Standard, which puts every price and every guarantee in writing before work begins. Our technicians have up to 22 years of experience, and every job gets background-checked, uniformed technicians. A live person answers the phone around the clock, no voicemail and no callback queue.
Call (844) 588-0072 to schedule your free estimate and get a written price on your Summerlin bathroom project before anything starts.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












