







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Summerlin Owner’s Guide
A bathroom remodel in Summerlin that ties into ES Windows products typically runs $9,000 to $28,000 installed, and we schedule the work rather than promise same-day turnaround, because a full bathroom takes planning, permits and a real scope. Most owners don’t start with a remodel budget. They start because a shower pan is flexing, a vanity is pulling away from the wall, or a window sill in the bathroom has gone soft and chalky from years of dry desert air on one side and daily steam on the other. That is the moment a failed part forces the larger conversation, and it is exactly the conversation this page is built to answer.

Which ES Windows Models This Applies To
ES Windows has been a fixture in Nevada construction for a long time, and the products that show up around Summerlin bathrooms fall into recognizable families: vinyl single-hung and slider windows common in 1990s and early-2000s builds, dual-pane units with aluminum or vinyl frames, and the tempered-glass bathroom windows required by code in any opening within 60 inches of a tub or shower edge. That tempered requirement is a compatibility gotcha worth stating plainly, because an untempered replacement glass in a wet zone fails inspection and puts a household at real risk. When identifying the right part, check three things before anything else: the etched label in the corner of the glass (it carries the manufacturer, the glass type and a date code), the frame material, and the actual rough opening measured in three places, since Summerlin’s clay soils shift and a wall that measures 36 inches at the top can read 35 and 5/8 at the bottom. On the OEM-versus-aftermarket decision, ES Windows original parts match the profile and the sill geometry exactly, while quality aftermarket equivalents can save money but must match the weep system and the sash balance, or the window will leak at the sill within a season. We are an independent provider and not affiliated with ES Windows; we source parts that match the unit in front of us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Bathroom Remodeling Is Failing
Summerlin sits at roughly 3,000 feet with low humidity and hard sun, and bathroom windows and wet-area assemblies here fail on a predictable schedule. Here is what to look for:
- Soft, crumbly sill or frame corners. Water has gotten past the seal and into the wood or MDF substrate behind the trim. By the time you can press a thumb into it, the rot has usually run past the visible edge.
- Fogging between the panes. The sealed unit’s desiccant has saturated and the barrier has failed. It is cosmetic until it isn’t, but it means the glass assembly is done.
- Shower pan that flexes or clicks underfoot. The mortar bed under the pan has cracked or the pan was set on the subfloor without proper support. Small movement becomes a leak into the room below.
- Caulk lines that reopen within weeks. Not a caulk problem. It signals movement in the substrate or a wet wall that never dried out.
- Vanity pulling away from the wall or a cabinet box gone soft at the base. Usually slow leakage from a supply line or a drain gasket, and it eats the cabinet bottom before it shows on the floor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Summerlin, a full bathroom remodel runs $9,000 to $28,000. A small bathroom remodel runs $5,000 to $12,000. A walk-in shower installation is $4,500 to $12,000, a tub-to-shower conversion is $3,500 to $10,000, a shower replacement is $3,000 to $8,500, and a bathroom vanity installation is $800 to $3,000. The range is driven by square footage, whether the rough-in plumbing moves, tile selection, and whether the ES Windows unit itself needs replacement or only the surrounding wet-area assembly. Every price we quote is a written line-item price before any work begins, and it does not move at the door. Labor and materials are separated on the sheet so you can see what each part costs. Completed work carries the 365-Day Done Right Promise: if it fails within a full year, we come back and correct it at no charge.

DIY or Call Us?
An owner can safely check the glass label, measure the rough opening, look for soft wood at the sill with a screwdriver, and note whether a shower pan flexes. What should stop the DIY effort immediately is anything involving the wet-wall assembly itself: cutting out a shower pan, moving a drain, replacing a tempered glass unit in a wet zone, or opening a wall where supply lines run. A mis-set pan or an untempered glass in a shower opening is not a cosmetic mistake, it is a leak and a hazard, and correcting it costs more than doing it right the first time. We start every Summerlin job with a written price and a documented scope, and our technicians are background-checked and uniformed so you know who is in the house. Call (844) 588-0072 for a free estimate.
FAQs

A sealed dual-pane unit typically lasts 15 to 20 years before the desiccant fails, and a properly set shower pan lasts 20 to 30 years. In Summerlin’s sun and dry air, the exterior seal and caulk lines need attention every 3 to 5 years, and skipping that shortens both lifespans. Call (844) 588-0072 for an exact quote on replacement, and the estimate is free.
Sometimes, yes. A fogged glass unit can be re-glazed without replacing the whole window frame, and a vanity can be re-set if the cabinet box is still sound. A rotted sill or a flexing shower pan usually cannot be repaired and should be replaced. We tell you which case you’re in before any work starts, in writing. Call (844) 588-0072 to schedule the assessment.
A window or vanity replacement is typically a one- to two-day job, while a full bathroom remodel runs two to four weeks depending on tile, plumbing changes and inspection scheduling. We give you a written schedule before work begins, and we don’t move it without telling you first. Call (844) 588-0072 for a free estimate.
We identify the unit from the etched glass label, the frame material and the measured rough opening, then source a matching OEM or quality aftermarket part with a documented manufacturer spec. We source to the unit in front of us, not from a generic catalog guess. We also work with KraftMaid, Cambria and Silestone on the finish side. Call (844) 588-0072 and we’ll price it in writing.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












