







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Summerlin Owner’s Guide
PGT-compatible roofing repairs in Summerlin typically run $400 to $1,800, and full roof replacement runs $8,000 to $20,000 installed, depending on the series, pitch, and how much decking has to be replaced once the old roof comes up. Tile profile sections and impact-rated panels sit at the higher end; standard shingle work sits lower. Most Summerlin owners find out something is wrong during the first hard wind event of spring, when a lifted edge or a cracked tile throws water against a wall they can see from the driveway.

Before you call, know this: Bradford Remodeling Co Summerlin is an independent service provider. We’re not affiliated with PGT and we don’t speak for them. We install and repair PGT-compatible roofing systems, and we’ll tell you plainly when a PGT part is the right call and when it isn’t.
Key Takeaways
- PGT roofing work in Summerlin: repair $400-$1,800, full replacement $8,000-$20,000.
- Tile profile repairs run $600-$2,500; metal systems run $15,000-$40,000.
- You get a written price before any work starts, and a full-year written guarantee on the work.
Which PGT Models This Applies To

PGT builds roofing under a few product families, and the part you need depends entirely on which one is on your house. The most common source of a wrong order is matching by color instead of by profile. Two profiles that look the same from the street in Summerlin’s light can have completely different panel widths and fastener spacing, and the wrong panel won’t seat on the existing batten.
Here’s how to identify what you actually have:
- Find the stamp or label. PGT panels usually carry a stamp on the underside of an overhang panel or near a ridge vent. Photograph it with your phone before you call anyone.
- Measure the exposed panel width, not the total width. Measure from the center of one seam to the center of the next. That number is what any supplier needs. Total width tells them nothing useful.
- Measure the pitch. A cheap angle finder on a rafter tail inside the attic gives you a reliable number without getting on the roof.
On the OEM-versus-aftermarket question: for PGT, the honest answer depends on the profile. On current model lines, a quality aftermarket equivalent is often a straight fit and costs less. On discontinued lines, OEM is the only way to keep the coursing true, and waiting on an OEM part is usually smarter than forcing an aftermarket panel into a visible field. We’ll tell you which case you’re in once we see the stamp and the measurement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
Most of what fails on a Summerlin roof is failing because of the desert’s particular pattern: months of hard sun, then a monsoon season that hits an already-brittle material. Brittle is the key word. Heat ages a roof faster than rain ever does.
- Cracked or split tiles along one run. Sun cycling makes tile and panel material brittle, and one weak section takes the whole run with it. If the cracks line up, that’s not random damage, it’s a failing substrate underneath.
- Granules in the pool or at the downspout outlets. That’s shingle or panel topcoat shedding. Once granules are gone, the reinforcing layer is what’s left, and sun breaks it down quickly.
- Lifted edge panels and missing fasteners. Wind gets under a lifted edge and pulls fasteners straight out of the deck. On PGT systems, this often means the original fastener wasn’t long enough for the decking thickness, which is a Summerlin-specific problem on homes built with thinner sheathing.
- Water staining on the ceiling near a valley or chimney. That’s a flashing failure, not a panel failure. The part you need is the flashing, not the roof.
- Sagging along the ridge line. This one matters. A sag usually points to a deck or framing problem, not a roofing-material problem, and swapping roofing over a soft deck just moves the failure six months down the road.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Summerlin pricing for the work, with the numbers stated up front:
| Scope | Installed Price Range |
|---|---|
| Roof repair (flashing, localized panel or tile) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: the series and profile (a discontinued tile profile costs more to source than a current panel), the pitch (steeper roofs take longer and need more safety setup), how much decking has to be replaced once the tear-off exposes it, and whether the flashing is being reworked or reused. On a Summerlin home, decking condition is the variable that moves the number most, and we don’t know it for certain until the roof is open.
Here’s how we handle that. You get a written price before any work starts. If we open the roof and find soft decking, you get a written change order with a number on it before we touch it. No numbers that move at the door, no surprises on the invoice. Every completed roof carries the 365-Day Done Right Promise: if the work fails inside that first year, we come back and correct it at no charge.
DIY or Call Us?
Some of this is genuinely safe to check yourself. Walk the yard after a wind event and pick up any panel pieces or tiles that came down, because they tell you where the failure started. Look at your ceilings from inside for stains. Read the stamp on an overhang panel. Measure the exposed width. All of that is standing on the ground with a phone and a tape measure, and all of it makes our estimate faster.
Getting on the roof is where we draw the line, and the reason is honest rather than dramatic: a two-story Summerlin roof with a steep pitch is a fall hazard, period, and a fall from roof height is a serious injury. Walking a slope you don’t know, in heat, to inspect a panel you may not be able to identify anyway, isn’t worth it. The part itself isn’t dangerous to handle. The access is.
Call (844) 588-0072 and a live person picks up, day or night. We’ll get a technician out, confirm the profile and the scope, and put a written price in your hand before anything starts.
FAQs

Expect 15 to 20 years for most PGT roofing in Summerlin conditions, with tile profile systems reaching the upper end and shingle or thinner panel systems landing near 15. The desert shortens that window. Months of intense UV followed by monsoon wind is harder on roofing than steady rain, and roofs on south- and west-facing slopes age noticeably faster than north-facing ones. If your roof is past 15 years, get it looked at before monsoon season rather than after. Call (844) 588-0072 for a free estimate and a straight assessment.
Yes, often it can, and a localized repair runs $400 to $1,800 in Summerlin. The determining factor is the substrate. If the deck and underlayment are sound and the failure is confined to a run of tiles, a section repair is the right call and we’ll say so. If the deck is soft, or the profile is discontinued and the field can’t be matched cleanly, a repair just postpones a replacement. We’ll tell you which situation you’re in before we quote. Call (844) 588-0072 for that assessment.
A localized repair is usually a one-day job. A full roof replacement on a typical Summerlin home runs two to four days, depending on square footage, pitch, and how much decking has to be replaced. A metal roof runs longer. We give you a written schedule with the written price, so you know what days we’ll be on site before we start. Call (844) 588-0072 to schedule your free estimate.
We source directly against your profile and measurements, confirmed on site, not ordered from a photo. PGT roofing is manufactured and warranted by PGT, not by us, and that manufacturer warranty travels with the material. What we back is the installation: a written price before work starts, a clean site at close, and the 365-Day Done Right Promise on our labor. If the install fails inside that year, we return and fix it at no charge. Call (844) 588-0072 to get started.
Bradford Remodeling Co Summerlin works with a documented roster of name-brand materials across the whole home, from GAF and James Hardie exteriors to KraftMaid, Cambria, and Silestone on the inside. Every project starts with a written price and ends with a signed written guarantee in your hand. Bradford Remodeling is part of the Garrison Partners family, established in 2004, and operates as an independently owned and operated business held to The Garrison Standard. Our technicians have up to 22 years of experience, and every technician on your job is background-checked and uniformed, so you know exactly who’s walking through your door. When the work is done, the site is clean, the scope is documented, and the guarantee is yours. Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate on your PGT roofing work.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












