







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Summerlin Owner’s Guide
Tamko doesn’t make kitchen cabinetry, countertops or rebuild parts. Tamko is an asphalt roofing and waterproofing manufacturer, and its products enter a Summerlin kitchen remodel as roofing underlayment, waterproofing membrane and construction adhesive. If you searched for “Tamko kitchen remodeling,” the part you’re likely chasing is a Tamko membrane or adhesive that has failed under a sink, behind a backsplash or beneath a floor, and we install the repair and the surrounding kitchen work that follows: $14,000 – $45,000 for a full Summerlin kitchen remodel, with the membrane and moisture repair portion priced separately and in writing before we start.

Owners usually find the failure the same way. A soft spot in the flooring under the sink. A backsplash tile popping loose at the counterline. A dark stain spreading up a cabinet sideboard after the monsoon season. Tamko waterproofing that breaks down shows itself as moisture damage, not as a branded part that announces itself. You’ll know it by the smell first, then the softness.
Which Tamko Models This Applies To

Tamko waterproofing and membrane products are labeled on the roll core or the packaging band, and once installed, that label is gone. Your identification path is the remodel file: the original permit drawings, the contractor’s spec sheet, or the material invoice from when the kitchen was last worked on. Tamko’s product families are separated by application (underlayment, self-adhered membrane, flashing, construction adhesive), not by kitchen cabinet series, so the “model” that matters is the product code on the roll, not a cabinet line.
Two compatibility gotchas are worth knowing. First, Tamko self-adhered membranes are specified by width and by substrate, and a replacement roll that’s the right width but the wrong substrate rating will fail at the lap. Second, Tamko’s adhesive products are temperature-rated, and Summerlin’s surface temperatures in July push a low-rated adhesive past its working range before it ever cures. Measure the membrane width at the exposed edge, note the substrate (plywood, cement board, or concrete), and match the product code to the file. On the OEM-versus-aftermarket decision: Tamko-manufactured membrane is what we’d specify for a repair inside the existing footprint because it laps correctly to what’s already there. If the failed membrane is being replaced wholesale, a comparable-rated membrane from another manufacturer is fine, provided the spec sheet is in the file. We’re an independent contractor, not affiliated with Tamko, and we’ll tell you honestly which path fits. Our documented brand roster for the rest of the kitchen runs KraftMaid, Cambria, Silestone, Kohler and others, and every one carries a manufacturer spec sheet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
- A soft, spongy floor directly under or in front of the sink. Water has reached the substrate under the Tamko membrane, and the membrane has either broken at the drain cut or never sealed at the flange. Softness means the repair is now substrate work, not just membrane work.
- Tile or backsplash lifting along the counterline. The membrane under the backsplash has lost adhesion, and tile moves because the surface beneath it is no longer flat. This is a moisture symptom, and it will not fix itself by re-grouting.
- Dark staining or bubbling on cabinet toe-kicks and sideboards. The membrane has let water migrate outward under the cabinets. Cabinets can absorb this for months before you see it, which is why the stain shows up far from the actual leak.
- A musty smell that returns after cleaning. Adhesive failure in a Tamko membrane creates a trapped moisture pocket, and cleaning the kitchen surface won’t touch it. If the smell comes back within a week, the source is behind or below a surface.
- Visible lifting at membrane seams or a bubbling underlayment layer. This is the lap joint failing, most often because the original install didn’t account for Summerlin’s temperature swings between night and day. Seam failure is the most repairable of the five, if it’s caught before water reaches the substrate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Summerlin kitchen remodel alongside the membrane repair, install cost runs $14,000 – $45,000. A small kitchen remodel runs $9,000 – $20,000, and the membrane-and-waterproofing repair itself is priced as a line item inside that. If the repair pulls in cabinetry, cabinet installation runs $4,000 – $13,000; countertops run $2,000 – $6,500, depending on material and edge profile; the backsplash runs $800 – $2,500; and a kitchen island, if one needs to come out and go back, runs $3,000 – $10,000.
What moves the range: how far moisture traveled before it was caught, whether the substrate (the layer under the finish surface) needs replacement, and whether cabinets can be saved. What the price includes: tear-out, membrane and flashing, cured adhesive, substrate repair where needed, and the finish work. Every Summerlin job gets a written line-item price before a single tool comes out, and the work is covered by the 365-Day Done Right Promise, which is a full-year written guarantee on completed work. If a repair or installation fails inside that window, we come back and correct it at no charge. No numbers move at the door.

DIY or Call Us?
What you can safely check yourself: the surface under the sink for softness, the cabinet toe-kicks and sideboards for staining, the seam lines at the exposed membrane edge, and the smell test a week after cleaning. Those checks cost nothing and tell you whether you have a membrane problem or something further along.
What we’d steer you away from doing yourself: cutting into a substrate to reach a failed membrane, or re-sealing a membrane lap you can’t see. That second one is the trap. A homeowner re-sealing a visible seam is often sealing the wrong side, and the moisture keeps traveling under the floor until the joists show it. Substrate repair also means working around plumbing and electrical rough-in (the wiring and piping already inside the wall), and that’s not a homeowner repair. If the staining has reached a cabinet sideboard, call us. Live person answers (844) 588-0072, 24 hours a day.
FAQs

A properly installed Tamko membrane should hold 15 to 25 years, but Summerlin’s conditions shorten the low end. The inland desert swings between cool nights and 110°F-plus summer days push adhesive beyond its rated working range faster than in coastal climates, and the monsoon humidity adds a seasonal load. Membrane that’s failing at 10 years is common in Summerlin, and it usually fails at a seam or a drain cut first. If yours is that age and showing any of the signs above, call (844) 588-0072 for an exact quote. Estimates are free.
Sometimes, yes. A single failed seam or a drain cut that never sealed can be repaired without tearing out the whole kitchen, and that’s the cheaper path when the substrate is still sound. Once water has reached the substrate or stained a cabinet sideboard, repair alone isn’t the right call because the damage is now under the visible layer. We check substrate condition before quoting either way, and the written price tells you which one we recommend and why. Call (844) 588-0072 to schedule your free estimate.
A membrane repair on its own is a one-day job. A membrane repair plus the finish work it disturbed (backsplash, counter edge, toe-kick) typically runs three to five working days in a Summerlin kitchen. A full kitchen remodel around a failed membrane runs two to four weeks depending on the cabinetry lead time. We put the schedule in writing with the price, and it doesn’t get renegotiated once work starts.
We match by product code on the roll, substrate, and measured width, then specify from the manufacturer’s current line (or a documented equivalent) so the repair laps correctly to what’s already in your kitchen. We don’t carry stock, and we don’t send a crew out with a generic roll and hope for the fit. We verify the code against the file and order to spec. Call (844) 588-0072 for a free estimate and we’ll walk the kitchen with you.
Bradford Remodeling Co Summerlin installs waterproofing repairs and kitchen work under The Garrison Standard, which means a written price before work starts, background-checked uniformed technicians, and a live person on the phone any hour of the day. If your Summerlin kitchen is showing the moisture signs above, don’t wait for the smell to come back a third time. Call (844) 588-0072 to schedule your free estimate. The quote is written, the price doesn’t move at the door, and the work is backed by the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












