A Bradford company - serving Summerlin, NV
An open living room and dining area after a whole-home remodel
Atlas · Summerlin

Atlas Roofing in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Roofing: The Summerlin Owner’s Guide

Atlas roofing failures in Summerlin usually get found the same way: a ceiling stain shows up after a monsoon push, granules start collecting in the pool skimmer, or a roofer called out for something else points at lifted shingles and blistered sealant. As an independent service provider working with Atlas-compatible materials, we install and repair Atlas roofing components across Summerlin, typically in the $400 to $1,800 range for repair and $8,000 to $20,000 for a full roof replacement depending on pitch, square count, and how much decking needs attention. We’re not affiliated with Atlas; we source matching parts and spec them against your model.

General contractor measuring and leveling wood framing in a residential renovation in Summerlin, NV

Call (844) 588-0072

Which Atlas Models This Applies To

A remodeled family room with new windows and a window seat

Atlas runs a few product families that matter for Summerlin homeowners: the StormMaster line with its ShingleLock fastening system, the Pinnacle and ProLam architectural shingles, the Summit and Castlebrook designer profiles, and the ALEX Plus accessory line for underlayment, ridge caps, and starter strips. The part you need depends on which one is on your roof, and Atlas shingles from different lines don’t share the same exposure height or nailing pattern.

To identify what you have, climb only if you’re comfortable on a single-story roof, or pull the spec sheet the original roofer left behind. The tell is on the underside of a shingle tab: Atlas stamps the product name and, in many cases, the manufacturing code that ties the shingle to the correct cap, starter, and sealant. If the stamp is illegible, measure the tab width and exposure; StormMaster and Pinnacle both run a true 5-5/8 inch exposure, while some older ProLam runs closer to 5 inches, and a mismatched starter set will not lock correctly.

On the OEM-versus-aftermarket call: for Atlas-specific parts like the ShingleLock starter and the StormMaster hip and ridge caps, we generally spec OEM or a manufacturer-approved equivalent, because the sealant chemistry and nailing zone are engineered to the shingle. Generic three-tab caps from a big-box bin will lay flat but miss the shingle’s sealant line, which is exactly what fails first in Summerlin’s heat. Where a quality aftermarket underlayment meets Atlas’s published installation requirements, we’ll price it as an option and put both numbers in writing before any work starts. Our technicians have up to 22 years of experience reading these specs, and we also work with KraftMaid, Cambria, and Silestone on the interior side.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Roofing Is Failing

These are the symptoms Summerlin owners report most, and what’s usually behind each.

  • Granules in gutters and pool filters. Granule loss is normal at end of life, but heavy loss on a roof under 15 years old points to thermal cracking from Summerlin’s summer attic temperatures, which regularly push past 150°F and cook the shingle’s asphalt before its time.
  • Lifted or curled shingle edges. Curling usually traces to a failed sealant strip or blocked ridge and soffit venting. In Summerlin’s west-facing exposures, the sun does the rest once the seal breaks.
  • Ceiling stains after a monsoon. A stain that appears after a July or August storm almost always means a failed flashing at a valley, chimney, or skylight, not a shingle field failure. Water tracks along the underlayment to the lowest point.
  • Missing or cracked hip and ridge caps. StormMaster caps that crack or pop off expose the underlying shingle edge to wind and sun. On Summerlin’s exposed ridge lines, high wind and desert UV age caps faster than a shingle that’s protected by the field.
  • Soft or spongy spots underfoot. This is the one to treat as urgent. Soft decking means moisture has reached the sheathing, and the repair scope grows the longer water stays trapped.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A small remodeled galley kitchen with cabinets to the ceiling

In Summerlin, plan on the following installed ranges for Atlas roofing work, with every line itemized in a written quote before any work begins.

  • Roof repair (flashing, caps, sealant, spot shingle replacement): $400 to $1,800
  • Tile roof repair: $600 to $2,500
  • Full roof replacement with Atlas-compatible shingles: $8,000 to $20,000
  • Metal roof (if you’re weighing a change): $15,000 to $40,000

The number moves on square footage, pitch, number of valleys, whether the decking must be replaced, and how much tear-off is required. Parts and labor are shown separately so you can see what the shingle, cap, and underlayment actually cost versus the install. Every completed project is covered by our 365-Day Done Right Promise: a written guarantee for a full year, and if the work fails inside that window, we come back and correct it at no charge. You get a signed written guarantee in your hand at job close, along with a clean site.

DIY or Call Us?

Some of this is safe to check yourself, and some of it is not. Safe: from the ground with binoculars, look for curled edges, lifted caps, and any exposed underlayment; check attic-side for daylight, staining, or soft sheathing; and pull your spec sheet for the shingle model. Not safe: anything that puts you on the roof. Summerlin roofs are often steep, and asphalt shingles heated by a west-facing summer sun soften underfoot, which turns a routine walk into a fall. No field education program, no YouTube video, and no amount of confidence makes walking a 6:12 pitch safe. If you need to know the condition, we’ll put a trained technician on it instead.

The other place DIY goes wrong is material: a mismatched cap or a generic sealant that fails at the seam in one season, then turns a $400 repair into a $1,800 one when you hire out the re-do. If your answer lives in our written-price column, that’s the polite way of saying let us quote it. We answer the phone with a live person, 24/7, so call (844) 588-0072 and we’ll get you a written estimate, no pressure.

FAQs

A low-threshold walk-in shower with a bench and grab bar

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch