A Bradford company - serving Summerlin, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Atlas · Summerlin

Atlas Kitchen Remodeling in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The Summerlin Owner’s Guide

We install and repair Atlas kitchen systems in Summerlin, and a full kitchen remodel here typically runs $14,000 – $45,000 installed, with written pricing before any work begins. Cabinets, surfaces, and fixtures tied to an Atlas layout are our most common call. Most Summerlin owners don’t wake up planning a remodel. They open a cabinet door and the hinge has torn out of the particleboard, or the drawer glide grinds and stops halfway, or the counter seam near the sink has lifted after a summer of dry heat and hard water. That failing part is what starts the phone call. This page is about matching the right replacement to your Atlas model, understanding what actually failed, and knowing what it costs in Summerlin before you commit.

Professional contractors installing a bathroom mirror and vanity during a remodel in Summerlin, NV

Call (844) 588-0072

Which Atlas Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Atlas has produced cabinetry and kitchen component lines across several series, and the parts are not interchangeable between them. The first thing we do on any Atlas call is find the identification label. It’s usually a paper or foil sticker inside the door of the base cabinet next to the sink, or on the back panel of the top drawer box. It lists the series and a model or order number. Photograph it before anything else.

If the label is gone, we measure. Door thickness, hinge cup bore (the round hole cut into the door for the hinge), and drawer box height and depth tell us which Atlas series you have. This is the compatibility gotcha that trips up most homeowners: an Atlas hinge from one series looks identical to another, but the cup bore and overlay differ by a few millimeters, and the door won’t sit flush once installed. The same applies to drawer glides. Undermount glides from different Atlas series have different cabinet-floor mounting patterns.

On OEM versus aftermarket: for visible hardware (hinges, glides, handles), a quality aftermarket equivalent often fits and costs less. For anything structural to the cabinet box, we match the Atlas series part or the closest documented equivalent. We don’t stock parts and we don’t carry them on a truck. We source what your specific model needs, verify the fit before install, and put the part number in writing on the estimate. We’re an independent contractor, not affiliated with Atlas. We also work with KraftMaid, Cambria, and Silestone when a failing Atlas component is a good moment to upgrade rather than replace.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

Here’s what Summerlin owners describe when they call us. Each symptom points to a specific failure.

  • Cabinet doors that sag or won’t close flush. The hinge screws have stripped out of the cabinet frame, or the hinge itself has worn at the pivot. In Summerlin’s dry air, wood shrinks slightly over the seasons, and screw holes loosen faster than in humid climates.
  • Drawers that stick, grind, or fall off the track. The glide has failed internally, or the mounting screw has pulled from the cabinet floor. Undermount glides on older Atlas boxes are the usual culprit.
  • Countertop seams that lift or darken near the sink. Water and hard-water mineral buildup work under the seam. Summerlin’s water is hard, and the mineral deposit shows as a white line before the seam actually fails.
  • Cabinet box swelling or soft spots under the sink. A slow leak or condensation has soaked the substrate (the structural board under the finish). Once medium-density fiberboard swells, it doesn’t shrink back, and the part has to be replaced.
  • Backsplash tile or caulk separating from the wall. Movement in the cabinet run or a failed caulk joint. The fix is usually re-setting the joint, not re-tiling the whole wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

In Summerlin, an Atlas kitchen remodel or significant component replacement runs $14,000 – $45,000 installed. That’s the lead range and it holds. Smaller kitchen remodels here land at $9,000 – $20,000. If it’s a component job rather than a full remodel, these ranges apply:

Scope Installed range (Summerlin)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: which Atlas series you have, whether the part is OEM or a documented equivalent, cabinet run length, and whether the failing component sits inside a broader remodel. Every price we give is written before work starts. No numbers that move at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.

DIY or Call Us?

Some Atlas checks are safe for an owner. You can photograph the model label, measure a door or drawer, tighten a loose handle screw, and re-caulk a separating backsplash joint. Those are low-risk and worth doing before you call.

Where DIY goes wrong: replacing a hinge or glide on an Atlas series you haven’t correctly identified, and re-setting a cabinet that has swollen substrate. The first wastes money on a part that won’t fit. The second hides the real problem. A swollen box means moisture is still getting in, and a new door on a wet cabinet fails again within a season. Countertop seam repair near a sink is the same story. If water is under the seam, sealing over it traps the moisture. We diagnose the cause, match the part, and install it with the fit verified. Call (844) 588-0072 and we’ll tell you honestly whether it’s a part swap or a bigger fix.

FAQs

A freestanding soaking tub in a remodeled primary bathroom

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch