A Bradford company - serving Summerlin, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Grohe · Summerlin

Grohe Home Additions & ADU in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Grohe Home Additions & ADU: The Summerlin Owner’s Guide

We build Grohe-compatible home additions and ADUs in Summerlin, and the installed range runs $45,000 to $130,000 for additions and $90,000 to $220,000 for a full ADU, depending on size, foundation, and how the plumbing and electrical tie into the existing house. The Grohe part you’re chasing typically surfaces the problem before the build does: a rough-in valve that won’t hold pressure, a cartridge that drips at first test, or a shower trim that doesn’t seat cleanly against the new tile. That’s when most Summerlin owners figure out their spec sheet listed a Grohe fixture without confirming which trim line, valve body, or rough-in depth the project actually needs.

professional kitchen remodeling service in Summerlin, NV

Call (844) 588-0072

Which Grohe Models This Applies To

A tile setter installing wall tile in a shower

Grohe’s residential lineup splits into a few families: Grohtherm and Grohflex thermostatic and pressure-balance shower valves, the Eurosmart and Grohclick handshower ranges, the Rainshower and Tempesta shower systems, and the Concetto and Eurocube faucet lines. Each family uses its own cartridge and rough-in, and the part you need is stamped inside or under the cover plate, not on the box. Pull the handle or trim, read the laser-etched number on the cartridge body, and measure the valve body’s rough-in depth. A 2.5-inch vs. 3-inch cartridge looks identical on the shelf.

For an ADU or addition, the decision that bites hardest is OEM vs. aftermarket. Grohe replacement cartridges and valve bodies come with the manufacturer’s spec sheet, torque values, and warranty – we buy those for anything buried in a wall. Aftermarket equivalents cost less but often skip the ceramic-disc tolerances and pressure-balance spring rates that Grohe builds to. On a Summerlin remodel where the valve is behind new tile, the wall has to come back open if the cheap part fails. Specify the Grohe OEM part on the drawing and keep the box.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Grohe Home Additions & ADU Is Failing

  • The shower drips when the valve is closed. A worn or mineral-fouled ceramic cartridge is usually the cause, and in Summerlin’s hard water it can start failing inside two or three years of daily use.
  • Water temperature swings when a second fixture runs. The pressure-balance spool inside the valve body is sticking, which points to a rough-in that wasn’t flushed before final trim.
  • The trim sits proud of the tile or won’t seat. The rough-in depth is off, or the wrong extension kit was used, and the cover plate can’t close the gap.
  • Rust or mineral buildup at the valve collar. Summerlin’s water is mineral-heavy, and a slow leak at the collar is the first visible sign the rough-in wasn’t sorted before the wall closed.
  • A cartridge that will not come out cleanly. Grohe cartridges seize if the valve wasn’t purged and the debris screen was left off, which means the body may need to be replaced too.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Grohe shower valve or cartridge replacement in Summerlin, expect $180 to $340 installed for a cartridge swap and $400 to $900 if a rough-in valve body or extension kit has to be replaced. An ADU rough-in plumbing package that specifies Grohe valves and fixtures sits inside the $90,000 to $220,000 ADU range, and home addition plumbing runs inside the $45,000 to $130,000 addition range. The range moves with rough-in depth, tile work required to reach the valve, whether the wall is drywall or backer board, and how many fixtures share the stack.

We give a written price before any work starts, broken into parts and labor, and we don’t move it at the door. A failed cartridge or valve we install is covered by our 365-Day Done Right Promise – if it fails inside that window, we come back and correct it at no charge. Materials come through a documented brand roster including Grohe, KraftMaid, Cambria, and Silestone, so the spec sheet traces to the part.

professional kitchen remodeling service in Summerlin, NV

DIY or Call Us?

An owner can safely check a Grohe cartridge without touching a pipe: shut the water off at the fixture stop, remove the handle, and look for mineral buildup or a stamped part number. That’s where it should stop. Rough-in valves sit inside the wall and connect to pressurize-and-test piping; if the valve body is cracked or the rough-in depth is wrong, the fix means opening the wall and sometimes redoing the waterproofing – not a job to chase with a wrench and a YouTube video. A slow leak behind a tile wall in Summerlin can rot framing before you see it.

If the cartridge won’t come out cleanly, or you’re not sure whether the valve body is Grohe OEM or an aftermarket stand-in, call us at (844) 588-0072. We’ll tell you what you’re looking at and whether it’s a cartridge swap or a rough-in fix before anyone charges you for a service call.

FAQs

New painted shaker cabinets with an organized deep drawer

How long does a Grohe cartridge last in Summerlin? Seven to ten years is typical in most climates, but Summerlin’s hard water shortens that to five to seven years for a heavily used shower, and shorter if the valve wasn’t purged during install. Call (844) 588-0072 for an exact quote – estimates are free.

Can the valve be repaired instead of replaced? Often, yes. A sticking pressure-balance spool or a mineral-fouled ceramic cartridge can be cleaned or swapped without opening the wall. If the valve body itself is cracked, replacement is the only fix. Call (844) 588-0072 and we’ll tell you which before we quote.

How long does the swap take? A cartridge swap is usually done in under an hour once the water is off and the trim is removed. A rough-in valve body replacement runs half a day or more once the wall is opened and the waterproofing is re-established. Call (844) 588-0072 to schedule the visit.

How do you source the part? We order Grohe OEM cartridges, valve bodies, and extension kits directly through the manufacturer’s parts channel, matched to the model number off your valve, not the box. That way the spec sheet and warranty travel with the part. Call (844) 588-0072 for a part-match and a written price.

Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing roofline

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch