







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Grohe Kitchen Remodeling: The Summerlin Owner’s Guide
Kitchen remodeling that keeps your Grohe fixtures and works around them typically runs $14,000 – $45,000 installed in Summerlin, depending on cabinet scope, countertop square footage, and how much plumbing has to move. We are an independent contractor and are not affiliated with Grohe, but our technicians have up to 22 years of experience fitting Grohe kitchen components into remodels without tearing out a working fixture just to replace a cover plate. Most Summerlin owners start looking for answers the moment a Grohe pull-down sprayer loses pressure, the spray head starts dripping at the wand, or a single-handle cartridge begins to stiffen and stick. Those signs usually mean a worn valve cartridge, a failing diverter, or a mineral-clogged aerator, not a reason to replace the whole faucet.

Key Takeaways
- Grohe kitchen remodels in Summerlin price at $14,000 – $45,000 installed, with the written price delivered before work begins.
- Most Grohe failures in Summerlin kitchens are cartridges, diverters, spray heads, or aerators, not the faucet body.
- Hard Summerlin water is the leading cause of premature Grohe wear; scale builds faster here than in softer-water markets.
- Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee.
Which Grohe Models This Applies To

Grohe kitchen lines split into a few families, and the model determines which cartridge or spray assembly you need. The Eurosmart, Concetto, LadyLux, and Minta lines are the most common in Summerlin homes, and each uses a different cartridge format. The single most useful compatibility gotcha: Grohe cartridges are not interchangeable across series even when the handle looks identical. A 35mm cartridge body will not seat in a fitting machined for a 46mm body, and aftermarket sellers frequently list “fits Grohe” without naming the series. Before you order anything, pull the faucet and read the etched model number on the body or the underside of the base ring. If it’s gone, measure the cartridge diameter and the spline count on the stem.
The OEM-versus-aftermarket call is genuinely yours to make. A genuine Grohe cartridge costs more and carries the manufacturer’s fit guarantee. A quality aftermarket equivalent from a known maker can run 40 – 60% less and often serves fine. The risk sits with unbranded cartridges: soft brass and thin O-rings that fail inside a year. We source to the model, document what we install, and put the price in writing before we touch the faucet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Grohe Kitchen Remodeling Is Failing
Owners usually notice a Grohe problem through one of these symptoms. Each points to a specific part, and each is worth diagnosing before you replace anything bigger than necessary.
- Dripping from the spout when the handle is off. That’s a worn ceramic cartridge or a scored seat. The faucet body is almost always fine.
- Stiff or sticky single-handle movement. Scale and mineral grit have gotten into the cartridge bore. In Summerlin’s hard water, this shows up years earlier than in softer-water markets.
- Weak spray from the pull-down head. A clogged aerator, a failing diverter, or a spray head that’s scaled internally. On Grohe pull-downs, the diverter inside the head is usually the culprit.
- Water weeping at the base of the faucet or under the deck. A worn O-ring or a loose mounting nut. Ignored long enough, this reaches the countertop substrate and cabinet deck.
- Spray head won’t hold position or leaks at the wand joint. The internal magnet and the hose-to-head seal have worn. Both are replaceable on most Grohe pull-down models without pulling the whole faucet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Grohe kitchen remodeling in Summerlin prices at $14,000 – $45,000 for a full remodel, and the range is driven by cabinet scope ($4,000 – $13,000 installed) and countertop square footage ($2,000 – $6,500). A backsplash runs $800 – $2,500, and a kitchen island $3,000 – $10,000. If your Grohe faucet only needs a cartridge or spray-head swap during the remodel, that’s folded into the written scope. Every project gets a written price before work starts, a line-item scope of materials and labor, and the 365-Day Done Right Promise, which covers the work for a full year and brings us back at no charge if anything fails inside that window. That guarantee covers our labor and installation; it does not replace Grohe’s own product warranty, and we’ll tell you plainly which one applies to your failure.

DIY or Call Us?
You can safely check a few things yourself: run the faucet and watch for drips, look at the spray head for scale, and read the model number. What you should not do is open the faucet body to swap a cartridge on an older Grohe fitting without shutting the water at the angle stops first; a seized cartridge or a cross-threaded bonnet under pressure will flood a cabinet fast, and Summerlin cabinet substrate doesn’t recover. If your faucet is on a shared manifold or a recirculating hot line, shut-off mistakes get expensive. For a cartridge swap, a spray-head replacement, or a full remodel that keeps your Grohe, call us and we’ll price it in writing. Call (844) 588-0072 for a free estimate. We also work with KraftMaid, Cambria, and Silestone cabinetry and surface components.
FAQs

Expect 5 – 10 years on a genuine Grohe cartridge in Summerlin’s water, and closer to 5 – 7 if you have a water softener that’s been neglected. Hard water accelerates scale buildup, which is the top reason Grohe cartridges wear early here. If yours is past that window and stiffening, call (844) 588-0072 for a free estimate on a swap.
Usually yes, and that’s the honest answer for most Grohe kitchen failures. A dripping faucet is a $40 – $120 cartridge replacement on most models; a leaking spray head is a head-and-hose assembly swap. Full faucet replacement is only needed when the body is cracked or the seat is scored. We’ll tell you which you need before you commit, and the price is written before work starts. Call (844) 588-0072 for an exact quote, free.
Most single-cartridge swaps run 30 – 60 minutes once the right part is on hand. The reason we ask for the model number first is that the wrong cartridge means a second trip. If we’re folding the swap into a Summerlin kitchen remodel, it happens during the plumbing rough-in or finish stage, not as a separate visit. Call (844) 588-0072 to book a free estimate.
We source by model number from Grohe’s parts channel and from documented aftermarket suppliers we’ve vetted, and we hand you the part and its spec sheet so the serial and SKU are traceable. We do not keep parts on a truck or in local stock; the match is ordered against your faucet’s etched number, not guessed from a photo. Call (844) 588-0072 for a free estimate.
If you’re ready to price a Grohe-compatible kitchen remodel in Summerlin, we’ll put the scope and the number in writing before a single tool comes out. Call Bradford Remodeling Co Summerlin at (844) 588-0072 to schedule your free estimate, and we’ll walk through the full scope, the part match, and the 365-Day Done Right Promise with you.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












