







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Summerlin Owner’s Guide
We install Schluter-compatible windows and doors in Summerlin, and most window and door replacement projects run $4,500 – $15,000 for standard replacements or $8,000 – $25,000 for impact-rated units, depending on count, size, and glazing. Door replacements typically bundle into that same range. We’re an independent service provider, not affiliated with Schluter, but our technicians have up to 22 years of experience matching hardware, trim, and thresholds to the specific system already in your wall.

Summerlin owners usually figure out something’s wrong in one of two ways. Either the door starts dragging at the strike plate during the June heat, or a window seal fogs from the inside after a windy spring. Both point to a failed or mismatched component in the Schluter assembly, and both get worse if you wait. In The Ridges and Red Rock Country Club, we see the fogging complaint most often on west-facing glass that takes the full afternoon sun.
- Top of mind: Schluter-compatible windows and doors installed across Summerlin
- Typical range: $4,500 – $15,000 standard, $8,000 – $25,000 impact-rated
- What we bring: written price before work starts, 365-Day Done Right Promise
Which Schluter Models This Applies To

Schluter’s window and door line covers several series, and the part you need depends on which one is in your opening. The quickest way to identify it is the manufacturer label, usually a small sticker on the top or side of the sash or on the door slab’s hinge edge. Failing that, measure the rough opening and the visible glass area. Series compatibility matters because the weatherstripping profile, the sill extrusion, and the corner key are not interchangeable between them. Ordering the wrong profile is the most common mistake we see, and it’s an expensive one because a mismatched sill won’t seat against the rough opening and will leak at the first hard rain.
On the OEM question: for Schluter specifically, we recommend OEM or a verified equivalent for anything structural or sealing – the sill, the frame corners, the glass unit itself. Generic trim and hardware can often be matched safely. A local Summerlin homeowner with a failing seal on an older unit will sometimes be quoted a full replacement when a glass pack swap would do. Ask the question. We’ll tell you which path makes sense for your model and your budget, and we’ll put the answer in writing before we touch anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its desiccant seal. Once moisture is inside, the insulating gas is gone too, and the unit’s efficiency is finished.
- Draft at the frame or threshold. Weatherstripping has compressed or the sill has shifted. In Summerlin’s heat, foam and rubber gaskets harden faster than most homeowners expect – often well before the manufacturer’s rated lifespan.
- Door drags or won’t latch. The hinge side has sagged, or the frame has moved with the desert soil. Slab swelling and hinge wear both show up first as a strike plate that won’t catch.
- Water staining or soft wood at the sill. The sill pan or flashing has failed. This one is urgent – once the substrate gets wet, the damage spreads under the flooring.
- Visible cracks in the frame or sash. UV degradation or impact damage. A cracked vinyl or aluminum frame will not hold a seal, and it will not get better on its own.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for Summerlin:
| Scope | Installed Range |
|---|---|
| Standard window replacement (per unit, typical) | $4,500 – $15,000 project |
| Impact-rated window installation | $8,000 – $25,000 project |
| Door replacement (bundled) | Within the above ranges |
What drives the range: the number of units, glass type (impact vs. standard, low-E vs. clear), frame material, whether the rough opening needs repair, and whether the sill pan or flashing needs replacement. We don’t quote a number that moves at the door. Every price is written before work starts, itemized by parts and labor, and the labor is fixed. All completed work carries the 365-Day Done Right Promise – if something fails inside that year, we come back and correct it at no charge. That guarantee covers the installation and the materials we supply.
DIY or Call Us?
You can safely check the label on your sash, measure the rough opening, and confirm the model before you call anyone. That’s useful information and it saves time. You can also replace weatherstripping on an interior door yourself; that’s low-risk work.
What we don’t recommend DIY on: glass unit swaps, sill pan replacement, or anything that involves removing the frame from the rough opening. The glass is heavy, the seal is the whole point, and a mis-set sill pan will leak into your wall cavity long before you notice it. On a second-story window in Summerlin, the fall risk alone settles the question.
If you’re not sure which side of that line you’re on, call us at (844) 588-0072. A live person answers, day or night, and we’ll give you a straight read on what your Schluter unit actually needs.
FAQs

Expect roughly 20 years for the frame and 10 – 15 for the sealed glass unit under normal conditions. In Summerlin’s UV load and summer heat, that glass unit often fails closer to the 10-year mark on west- and south-facing exposures, so plan on a glass pack replacement before the frame needs anything.
Often yes. A failed glass unit can be replaced without pulling the whole window, weatherstripping and hinges are serviceable, and a dragging door usually needs hinge adjustment rather than a new slab. If the frame is cracked or the sill pan is rotted, replacement is the honest answer.
A single window or door is typically a half-day to a full day, depending on the opening and whether trim and sill need rework. A whole-house window package in Summerlin runs several days. We schedule the work in one block and don’t leave openings exposed overnight.
We order OEM or verified-equivalent components matched to your model and series, confirmed against the label on your unit before the order goes in. We don’t carry parts on a truck and we don’t claim to – the correct part gets ordered for your specific opening, and the written price reflects exactly what’s coming.
We also work with KraftMaid, Cambria, and Silestone on the interior side of these projects. Call (844) 588-0072 to schedule your free estimate and get a written price before we start.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












