A Bradford company - serving Summerlin, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Summerlin

Schluter Bathroom Remodeling in Summerlin, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Summerlin
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled primary suite with built-in wardrobes and a window seat
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Bathroom Remodeling: The Summerlin Owner’s Guide

We install Schluter bathroom remodeling systems in Summerlin, and a full bathroom runs $9,000 – $28,000 installed, depending on how much waterproofing and substrate work your project needs. Schluter components are reliable, but they don’t last forever, and Summerlin’s desert climate and hard water wear on shower assemblies faster than most homeowners expect. The failures we see most are water working past a failed drain flange, a bonded waterproofing membrane that was installed over the wrong substrate, or a shower niche or curb that never got the proper Schluter-KERDI seal.

General contractor and client reviewing blueprints at a home renovation site in Summerlin, NV

Call (844) 588-0072

The tricky part is that Schluter isn’t a single part you can bolt on and forget. It’s a system: KERDI waterproofing membrane, KERDI-BOARD tile backer, the KERDI-DRAIN and KERDI-LINE drain assemblies, and the shower niche and curb components that all fit together. When one link fails, the visible damage shows up in a tile, but the real problem is usually below it. That’s why the first step is always matching your exact Schluter system to the right replacement, not guessing at the nearest part on a shelf. Our technicians have up to 22 years of experience with these systems, and every project gets a written price before any work starts.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Before we quote anything, we need to know which Schluter system is in your bathroom. The two main families are KERDI (the rolled, bonded sheet membrane) and KERDI-BOARD (the rigid foam backer panels). Drains are their own category. KERDI-DRAIN is a bonded flange for standard center drains, while KERDI-LINE is a linear drain for slope-to-wall showers. Mixing a linear drain replacement into a center-drain rough-in is the compatibility mistake we see most, and it isn’t a small fix, it means reshaping the entire shower pan.

To identify yours, look for the printed labeling on the membrane roll, the drain assembly collar, or the KERDI-BOARD edge print. Measure the drain grate (common sizes run about 4 inches for KERDI-DRAIN grates and the frame, with linear drains long) and match the flange profile, not just the grate. On the OEM-vs-aftermarket question: for a Schluter drain assembly, stick with genuine Schluter replacement components. The flange geometry and the bonding fleece are engineered to work together, and a generic drain flange can lift or fail to bond properly, which is exactly how you get a slow leak into the subfloor. Where a plain cosmetic trim or grate finish is the only issue, a quality equivalent is fine, but the waterproofing layer is not the place to save money. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Schluter.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Bathroom Remodeling Is Failing

  • Grout lines that keep cracking near the shower floor. A flexible, shifting substrate is usually underneath, often KERDI-BOARD panels that weren’t fully seated or a pan that lost its bond. Grout cracks along the same line twice is the tell.
  • A soft or spongy spot in the shower pan. This points to water reaching the mud bed through a compromised KERDI-DRAIN flange bond. Once the pan holds moisture, the tile and board above it have to come out.
  • Water staining on the ceiling below, or a damp smell in the bathroom. Slow leaks behind a KERDI membrane or around the KERDI-LINE and KERDI-DRAIN assembly are the usual source. In Summerlin, the dry air hides surface moisture but does nothing for water caught behind the board.
  • Efflorescence or white powder on the tile or grout. Mineral salts pushed to the surface mean moisture is moving through the assembly. Summerlin’s hard water accelerates this and also shortens the life of metal drain components.
  • Tile or a shower niche patching that pops loose. A membrane that wasn’t fully bonded lets the tile release. If the niche or bench tile lets go, the KERDI seal behind it usually went with it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Summerlin, repairing or replacing a failed Schluter shower system starts around $3,000 – $8,500 for a shower replacement and runs to the full $9,000 – $28,000 bathroom remodel range when the waterproofing, board, and drain all have to come out. A walk-in shower installation sits in the $4,500 – $12,000 band, and a bathroom vanity installation adds $800 – $3,000 if the cabinet or countertop comes with it. The garage-side range exists because the price depends on how far the failure spread: one drain flange is a repair, but a pan that’s been leaking for a year means board, membrane, tile, and sometimes subfloor.

Every price we quote is written before work begins, with the part, the labor, and the scope listed line by line, so there are no numbers that move at the door. The finished work carries the 365-Day Done Right Promise: if the repair or remodel fails within a full year, we come back and correct it at no charge.

General contractor and client reviewing blueprints at a home renovation site in Summerlin, NV

DIY or Call Us?

You can safely check a few things yourself: look for the KERDI label, measure the drain grate, and note whether you have a center drain or a linear drain. That information helps us quote accurately. What we don’t recommend is trying to re-bond a failed KERDI membrane or reset a KERDI-DRAIN flange on your own. The waterproofing layer is the entire point of the system, and a sloppy bond looks fine until the first season of regular showers, then it leaks into the subfloor and the structure. Catching it early is cheaper than rebuilding a pan. Call (844) 588-0072 and we’ll help you identify the system before you spend anything on parts. A live person answers, day or night.

FAQs

A single-story rear room addition with tall windows and a new patio

How long does a Schluter shower system last in Summerlin? A properly installed Schluter system typically holds up for 20 years or more, but Summerlin’s hard water and dry-then-damp swings can wear drain components and grout joints sooner. Yearly attention to grout and drains makes the difference.

Can it be repaired instead of replaced? Sometimes. A single failed drain flange or a small tile-and-membrane repair can often be fixed without a full rebuild, and that’s usually the $3,000 – $8,500 range. The honest answer depends on how far moisture traveled, so we price it after inspecting. Call (844) 588-0072 for a free estimate and a written scope.

How long does the swap take? A targeted drain or membrane repair can run a few days; a full shower rebuild in Summerlin typically takes one to three weeks once we’re on site, depending on tile and drying time. We put the timeline in writing before work starts.

How do you source the part? We specify genuine Schluter components for the waterproofing and drain, matched to your exact system using the labeling and drain measurements. We also work with a documented roster of brand-name materials, including KraftMaid and Cambria, so the rest of your bathroom specifications are traceable. We don’t claim to stock parts or carry them on a truck; the right part for your system is what gets ordered.

If your Summerlin bathroom is showing any of these signs, the fix is usually cheaper the sooner we look. We’ll identify your Schluter system, give you a written price, and stand behind the work with the 365-Day Done Right Promise. Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate, and a real person will pick up.

Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A galley kitchen opened up to the dining room with a new peninsulaA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquette

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Summerlin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Summerlin team

A local vetted partner works across Summerlin and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 588-0072
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Bradford Remodeling Co Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch