







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Summerlin Owner’s Guide
If you’re adding space to a Summerlin home built around Toto fixtures, the little details are what break first: a failing supply stop behind a Toto toilet, a tired shutoff at the new wet-bar sink, a cracked cover plate on a Toto faucet at the vanity. These are the parts that turn a finished addition into a call-back. A full home addition in Summerlin typically runs $45,000 – $130,000, and a detached or attached ADU runs $90,000 – $220,000, so the $30 – $400 part that fails a year later stings out of all proportion. We install Toto-compatible plumbing and finish components as part of additions and ADUs across Summerlin.

Bradford Remodeling Co Summerlin is an independent remodeling contractor. We are not affiliated with Toto, and we don’t sell Toto parts on their behalf. What we do is install, fit, and replace the Toto-compatible components that sit inside an addition or ADU, priced in writing before the tools come out.
Key Takeaways
- Additions in Summerlin run $45,000 – $130,000; ADUs $90,000 – $220,000. The Toto parts inside them are cheap. The water damage they cause is not.
- Most Toto supply and shutoff failures in Summerlin show up as a slow seep at the escutcheon or a mineral crust on the angle stop, not a burst.
- Every project carries a written price before work starts and the 365-Day Done Right Promise, which covers the work for a full year.
- Call (844) 588-0072 for a free estimate. A live person answers, day or night.
Which Toto Models This Applies To

Toto’s residential lineup splits into a few families, and the part you need depends on which one you have. The workhorse toilets are the Drake (CST743/CST776), the Eco Drake, the Ultramax, and the Aquia. Bidets and washlets (the S550e, C5, and S7) use their own fill valves and connection kits, and those are not interchangeable with the toilet fill valves. Toto faucets and lavatory fixtures take their own aerators and cartridge sizes by series, so matching by model number matters more than matching by look.
How to identify what you actually have: pull the tank lid and look for the model stamp on the inside back wall, or the sticker under the lid. For faucets, find the model number on the tag under the base or inside the cabinet below. If there’s no tag, measure.
- Fill valve: Toto fill valves are generally shorter-bodied than generic fluidmaster types, and the shank thread pitch differs. A generic valve can fit but will often whistle or overfill in a Toto tank.
- Flush valve / flapper: the Drake’s 3-inch flush valve is a different size from the 2-inch valves in most builder-grade toilets. Buying the wrong size is the single most common Summerlin mistake.
- Angle stops and supply lines: Toto toilets use a standard 3/8-inch compression inlet, so the stop and braided line are where the generics are perfectly fine.
OEM vs aftermarket: for flush and fill valves, a genuine Toto part or a verified Toto-specific aftermarket (Korky makes Toto-fit valves) is worth the extra $8 – $15. For supply lines and stops, a name-brand generic (Brasscraft, Fluidmaster) is the right call and nobody will know the difference in 10 years. We install the documented brands we’re specified to: Kohler and Moen for the fixture side, with KraftMaid, Cambria, and Silestone turning up in the cabinetry and surface work. Where a Toto component must match a Toto fixture, we match by model number, not by eye.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
The failure modes in an addition or ADU are almost always plumbing-adjacent, and they show up months after the drywall goes up. Here’s what to watch for in Summerlin:
- A mineral crust ring on the angle stop behind the toilet. Summerlin’s water runs hard, and the calcium in it eats through the rubber washer in a cheap stop in three to five years. That crust is the leak telling you it’s already failed.
- The toilet runs for a few seconds after it flushes, then stops. Usually a worn flapper or a fill valve that isn’t seating. In a Toto, an oversized generic flapper holds the valve open longer than the tank was designed for.
- Water stains or soft drywall at the base of the toilet or behind the wet-bar sink. The supply line or the stop is weeping. On a Toto install, this often means the compression nut on the angle stop was snugged, not correctly seated on the ferrule.
- A whistling or hissing fill valve. The valve is fighting a mismatched shank or the orifice has scaled up. Common in Summerlin homes with a softener that’s been bypassed or undersized.
- Low flow at the add-on lavatory faucet, or the handle feels spongy. Aerator screen clogged with mineral, or the cartridge has failed. Toto cartridges are series-specific; the wrong one will fit the bore but leak at the seal.
Most Summerlin additions sit over a slab, which means a leak behind a Toto fixture on a slab-on-grade floor can travel under the tile before you see it on the ceiling below. That’s why catching a failing stop early is worth more than the part.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest number for Toto-compatible components inside a Summerlin addition or ADU, installed. These are ranges, and the range depends on access, not on how hard we’re willing to look for the part.

| Item | Installed price range | What drives the range |
|---|---|---|
| Angle stop replacement (per fixture) | $30 – $120 | Access behind the toilet or under the sink, and whether the wall is open or finished. |
| Supply line replacement | $25 – $90 | Length, braided vs. stainless, whether the stop comes off with it. |
| Toto fill valve replacement | $80 – $180 | Genuine Toto vs. Korky-fit part, tank removal for full access. |
| Toto flush valve / flapper | $60 – $160 | 3-inch vs. 2-inch valve, tank-to-bowl gasket while we’re in there. |
| Toto faucet cartridge or aerator | $90 – $240 | Series match, handle disassembly, whether the cartridge is seized. |
Every line gets a written price before we start. The price doesn’t move at the door, and it doesn’t move mid-job. All of this work carries the 365-Day Done Right Promise: if a replaced part fails or the fitting weeps inside a year, we come back and correct it at no charge. If a larger addition scope is on the table, kitchen work runs $14,000 – $45,000 and bathroom work $9,000 – $28,000, and those get the same written-price treatment.
DIY or Call Us?
Some of this is genuinely owner-doable, and we’ll say which. Swapping a braided supply line on a Toto toilet or a sink shutoff is a wrench and 15 minutes, as long as the angle stop below it isn’t seized. Replacing an aerator on a Toto faucet is a twist and done. If the stop itself won’t turn or is leaking, stop and call. Snapping a seized stop off a live line behind a toilet in a finished Summerlin addition means a flood, a drywall repair, and a much bigger number than the $30 – $120 the stop would have cost.
The safety line: if your addition or ADU has a gas line to a dryer, water heater, or range, do not touch it. Gas work belongs to a licensed technician, full stop. Same for anything on an electrical panel; the part behind the wall isn’t a parts job.
For the fill valve, flush valve, and cartridge work, matching the Toto model is the whole game. Call us at (844) 588-0072 and describe the toilet or faucet; we’ll get the correct part and a written price before we show up.
FAQs

Expect seven to twelve years on a fill valve and ten to fifteen on a Toto flush valve, but Summerlin’s hard water shortens those numbers. We routinely see fill valves fail closer to six or seven years in homes without a working softener.
Sometimes. A flush valve that’s just scaled up can be cleaned; an aerator can be soaked and reseated. A cracked fill valve body or a stop that won’t seal can’t be repaired and gets replaced. Call (844) 588-0072 for an exact quote; we’ll tell you which it is.
A Toto fill valve or flush valve is a 30-minute job, an angle stop is 15 to 20, and a faucet cartridge depends on whether it’s seized. If the wall needs opening for access behind a slab-on-grade fixture, add an hour or two. The written price covers the access work before we start.
By model number off the stamp inside your tank lid or the tag under your faucet, not by matching a photo. We order the Toto-specific part or the verified Toto-fit aftermarket equivalent, and we tell you which one you’re getting and what it costs before we install it. Call (844) 588-0072 to schedule your free estimate.
Bradford Remodeling Co Summerlin is the by-the-book contractor for Summerlin homeowners who are tired of no-shows and numbers that move. Every price is in writing before work starts, technicians are background-checked and uniformed, and a live person answers at (844) 588-0072, day or night. Call to schedule your free estimate – the price is fixed, and the 365-Day Done Right Promise backs the work for a full year.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












