







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Summerlin Owner’s Guide
American Standard-compatible kitchen remodeling in Summerlin runs $14,000 to $45,000 installed, with most of that range driven by cabinet and surface choices rather than labor. We quote the full job in writing before tools come out, and the work carries our 365-Day Done Right Promise. If you’re replacing a single failing component instead, smaller scoped jobs land between $800 and $13,000 depending on what’s being swapped.

How Summerlin owners usually find us: a cabinet door that won’t stay closed, a drawer glide that binds halfway out, a surface caulk line that’s pulling away from the wall after one dry summer. Sometimes it’s a rough-in connection that’s been weeping just enough to stain the substrate under the sink. The pattern is the same – a part that worked for years in a milder climate starts failing in the desert cycle. That’s the point where the honest question becomes repair versus full remodel, and we’ll tell you which one we’d choose if it were our kitchen.
Which American Standard Models This Applies To

American Standard’s kitchen line is narrower than its bath line, and the model matters because fit and finish tolerances vary by series. If your cabinet boxes or drawer systems came through a builder package, the label is usually inside the cabinet door, on the back panel, or on the underside of a drawer. Write down the series name and any part number stamped there before you call anyone – it’s the fastest way to match a glide, hinge, or handle to what’s actually in your Summerlin kitchen.
The core decision for American Standard specifically is OEM versus quality aftermarket. American Standard’s OEM replacements match fit and finish exactly and carry the manufacturer’s specification, which matters if you’re doing a partial swap and want the new part to match the original hardware visually. Aftermarket equivalents are often 30-50 percent cheaper and can be perfectly serviceable, but tolerances on drawer glides and hinges drift enough that a “close” aftermarket match may not hold a heavy drawer over years of use. For any part that carries load – glide rails, drawer boxes, hinge plates – we lean OEM unless the budget genuinely can’t carry it. We’re independent and not affiliated with American Standard; we simply work within their spec range when that’s what’s in your kitchen. We also service KraftMaid, Cambria, and Silestone in the same kitchens.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
A single failing component rarely means the whole kitchen is gone. Here’s what we actually see when we open cabinets in Summerlin homes:
- Drawer glides that bind or stick. The rollers flatten and the track collects desert dust; a glide that ran smooth at 60 degrees acts differently in a closed cabinet at 100-plus. Most of the time the fix is a glide swap, not a drawer rebuild.
- Cabinet doors that won’t hold a stop position. Hinge tension gives out, or the screw holes in the cabinet frame have stripped. That’s a hinge and pilot-hole problem, and it’s cheaper to correct early than to wait for a door to drop off a worn plate.
- Caulk and grout lines pulling away from walls and surfaces. Summerlin’s low humidity cycles kitchen caulk faster than coastal climates. When the bead separates from the backsplash or a countertop seam, water and dust work their way in behind it.
- Water staining under the sink or around a dishwasher rough-in. That’s the rough-in, not the cabinet. A slow drip from a supply line or drain connection stains the substrate and softens it over months.
- Countertop seams that flex or show shadow lines. Usually a substrate or adhesive failure, sometimes a sign the counter wasn’t set on a flat surface to begin with. This is the one symptom worth looking at sooner, because seam movement puts stress on the slab or composite.
Replacement Cost & What’s Included

Here’s the range we quote in Summerlin, with components broken out so you can see where the money goes:
| Job | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number within a range: cabinet box material and door style (a KraftMaid painted line sits higher than a flat-panel stock line), surface material (Cambria and Silestone both carry a different cost profile than a basic laminate), whether we’re moving plumbing or electrical rough-ins, and whether the substrate under the surface needs correction. Parts-plus-labor is quoted as one written figure; there’s no parts markup that appears after the crew is already in your kitchen. Every completed project under that written price carries the 365-Day Done Right Promise: if it doesn’t hold in the first twelve months, we come back and correct it at no charge. What the guarantee covers: the workmanship and the installation of every part we supplied. It doesn’t cover manufacturer defects on a part, but we’ll help you chase that with the maker.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can safely check yourself. Open the cabinet, look at the glide track and hinge plate, feel for play at the mounting screw, look at the caulk line and any discoloration at the substrate. If the part is visible and the swap is a simple hinge or glide on a cabinet door, a homeowner with basic tools can do it, and we’ll say so.
Where DIY goes wrong on a kitchen part: anything touching a supply line, a drain connection, a gas line for a range, or a 220-volt circuit for a built-in appliance. That’s a real electrical and water risk, and it’s worth having a trained technician on it. The same goes for pulling a countertop to chase a substrate problem – once you lift a slab or composite surface, the adhesive and seam work is a calibrated job. Call (844) 588-0072 and we’ll tell you straight whether your situation is a two-hour swap or something bigger. Every estimate is free and comes with a written price before any work starts.
FAQs

Cabinet hardware and glides typically run 8-15 years under regular use, and in Summerlin’s low-humidity, high-heat cycle we often see them fail on the earlier side because the wood and metal expand and contract harder than they would in a milder climate. Call (844) 588-0072 for an exact quote – estimates are free.
Sometimes. A stripped hinge screw can be filled and re-driven, a glide can occasionally be cleaned and re-tensioned, and a separated caulk line can be re-cut and re-beaded. When the part has physically cracked, warped, or lost structural tension, replacement is the honest answer. We’ll tell you which one before we quote it. Call (844) 588-0072 for a free estimate.
A single component swap like a glide set or hinge is typically under an hour. A cabinet installation runs 1-3 days depending on box count, and a full kitchen remodel runs several weeks. The window is in writing before we start. Call (844) 588-0072 for a free estimate.
We match off the label and part number in your cabinet, then source through the manufacturer’s specification channel or an approved supplier. We work from a documented roster of name-brand materials so specifications are traceable. That roster includes American Standard-compatible lines as well as KraftMaid, Cambria, Silestone, Kohler, and Moen. Call (844) 588-0072 for a free estimate.
Get a Written Price for Your Summerlin Kitchen
If you’ve got a failing American Standard kitchen component and you’ve been quoted numbers that moved at the door, we do the opposite. We answer the phone live 24/7 at (844) 588-0072, we put the full price in writing before a single tool comes out, and the finished work carries our 365-Day Done Right Promise – if it fails within the year, we come back and correct it at no charge. Our technicians have up to 22 years of experience, and every crew member on your job is background-checked and uniformed so you know exactly who’s coming through the door. Call us today for a free estimate on your Summerlin kitchen.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












