







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Summerlin Owner’s Guide
If you’re expanding a home around a Blanco kitchen or bath specification, a home addition in Summerlin typically runs $45,000 – $130,000 installed, and an attached ADU runs $90,000 – $220,000 depending on size, site work, and finish level. We build to Blanco’s published rough-in and fixture specifications so your sink, faucet, and cabinetry line up on the first pass, not the third. Every addition and ADU we complete is covered by the 365-Day Done Right Promise, and you get a written price before any work starts.

Most Summerlin owners don’t “discover” a Blanco problem in the part itself. They discover it during an addition or ADU build, when the existing Blanco sink or faucet deck has to be templated into a new countertop and the layout no longer fits the original spec. The other common trigger: a 12- to 20-year-old Blanco sink base that was fine until the addition moved the plumbing wall and the drain alignment shifted. New walls, new floors, new counters: that’s when the Blanco details show up in writing, and that’s when we’d rather know the model number up front.
Which Blanco Models This Applies To

Blanco’s catalog splits into a few families that matter for an addition or ADU. Undermount sink series like the Diamond, Valea, and Precis lines are the ones that most often end up in a Summerlin kitchen addition because they’re specified in a lot of builder plans. Cabinet-side, the Blanco pull-out and waste systems sit under a standard 24-inch base cabinet, and that base has to be built to the right interior width before your addition’s cabinetry order goes out.
Identify your model from the label on the underside of the sink rim or the inside of the cabinet box, then measure the cutout dimensions and the distance from rim to drain. That measurement is what drives the countertop template and the cabinet layout, not the marketing name. On a Blanco-led addition, the OEM-vs-aftermarket question shows up in the sink: an OEM Blanco sink comes with the exact cutout template and a manufacturer finish warranty, while a generic aftermarket equivalent saves money but rarely matches the template. In an ADU, that mismatch usually means a re-template, and a re-template in Summerlin countertop fabrication costs more than the sink did.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
These are the signs we see in Summerlin during a walk-through, and each one points to a specific cause.
- Water pooling under the sink base during the addition punch list. The drain rough-in moved when the new wall went up, and the sink drain no longer lands where the original Blanco template specified. A re-template or a revised P-trap run fixes it.
- Cabinet doors rubbing against the countertop overhang. The new counter was templated to the old cabinet line, not the Blanco sink cutout. In an ADU, this typically means the base cabinet is 1/2 inch off from the standard Blanco pull-out box width.
- A hairline crack at the sink rim corner. Summerlin’s spring temperature swings from the low 50s to the low 90s in a matter of weeks stress a sink that was set on a flat deck without proper support. The fix is a support brace under the rim and a new setting bed.
- Faucet play when you push the handle. The Blanco faucet deck was cut for a 1-3/8 inch hole but the new faucet’s base is 1-1/2 inch, so the base sits on the counter instead of the deck. That’s a countertop template error, not a faucet problem.
- Waste pull-out won’t clear the cabinet opening. The addition used a 21-inch deep base, and the Blanco waste system needs 22 inches. Ordering the right cabinet size up front avoids a rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Summerlin, a home addition runs $45,000 – $130,000 installed, and an ADU build runs $90,000 – $220,000. That’s the whole job, not a single part. The Blanco-spec items inside it are the pieces that move the number: an OEM-level Blanco sink with cutout template and finish warranty adds roughly $600 – $1,400 depending on series, and a re-template of a countertop costs $400 – $900. We write those line items into the estimate before the job starts so nothing gets added at the door. Every completed addition and ADU carries the 365-Day Done Right Promise: if any part of the work fails within a full year, we come back and correct it at no charge.
Fabrication and installation of a new Blanco sink and countertop in a kitchen addition typically runs $2,000 – $6,500 for the countertop and $800 – $2,500 for the backsplash, both in the written scope. Those numbers sit inside the lead range above, not on top of it.

DIY or Call Us?
You can safely check the Blanco model label, measure the cutout, and photograph the under-sink area. That’s information, and we want it.
Where DIY goes wrong is the moment the addition’s plumbing wall is already framed and you’re trying to rework the sink drain line to meet the new Blanco template. Moving a drain, re-templating a countertop, and rebuilding a base cabinet to fit a specific Blanco pull-out aren’t homeowner jobs, and the cost of a wrong cut is a new countertop slab. This is where we tell Summerlin homeowners to stop and call: (844) 588-0072 gets a live person 24 hours a day, no voicemail, and the estimate is free.
FAQs

A Blanco sink in a properly supported Summerlin install typically lasts 15 – 25 years, and a Blanco cabinet pull-out or waste system lasts 10 – 15 years before the slides or clips need replacing. Summerlin’s dry summer air and the spring temperature swing both shorten the life of a sink set on a flat, unsupported deck. Call (844) 588-0072 for an exact quote on your addition’s Blanco scope.
Often yes. A cracked rim can sometimes be supported from underneath, and a mis-cut countertop hole can be re-templated with a trim ring rather than a full slab replacement. The decision comes down to whether the Blanco part is still under its manufacturer warranty and whether the cutout can be re-worked without compromising the sink. Call (844) 588-0072 and we’ll tell you straight which way it goes.
A Blanco sink swap in an existing kitchen typically takes 4 – 8 hours once the countertop is clear, and a cabinet-level part swap takes 1 – 2 hours. If the addition or ADU moved the plumbing wall, add a re-template day. We put the schedule in the written scope so you know what to expect. Call (844) 588-0072 to schedule a free estimate.
We spec from Blanco’s published series documentation and order against the model label on your existing sink or cabinet box. Our material roster is documented across the trade, and we work with named manufacturers including KraftMaid, Cambria, and Silestone on the cabinetry and countertop side so specifications are traceable. Bradford Remodeling Co Summerlin is an independent service provider and is not affiliated with Blanco. Call (844) 588-0072 for a written price before any work starts.
If you’re planning a Summerlin home addition or ADU and Blanco is part of the spec, the free estimate is where it starts. Give us a call at (844) 588-0072, and we’ll walk the job, put the Blanco details and the full price range in writing, and answer the phone with a live person whenever you call.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












