







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Windows & Doors: The Summerlin Owner’s Guide
We install Moen-compatible windows and doors in Summerlin, and the most common installed range we quote for a door and window package tied to Moen hardware is $4,500-$15,000 for standard window replacement and $800-$25,000 when impact-rated glass and door systems are involved. When a Moen handle, hinge set, or multipoint lock on a patio or entry door fails, you’ll usually find out in one of two ways: the door no longer latches flush, or the handle spins and the door stays shut. Summerlin owners frequently catch it first on west-facing doors, where afternoon sun in the valley has already worked on the finish for a season or two. Get a written price before anyone touches the frame.

Which Moen Models This Applies To
Moen’s window and door hardware shows up mostly on sliding patio doors, French doors, and entry doorsets rather than on the window sash itself. If you’re chasing a failed part, the model lives on a label you’ll find in one of three places: on the door edge above the top hinge, stamped into the faceplate of the multipoint lock, or on a sticker inside the jamb channel. Photograph it before you order anything. The gotcha that costs Summerlin homeowners the most time is the backset and faceplate width – a Moen multipoint lock on a wide-stile patio door won’t drop into a narrow-stile frame even when the model prefix looks right. Measure the faceplate width to the sixteenth of an inch and the center-to-center screw spacing, not just the overall length. For OEM versus aftermarket: OEM keeps the factory finish and the original warranty intact, while a quality aftermarket equivalent can run 30-40% less and is fine on interior hardware. On exterior doors, we specify OEM-spec parts so the weather seal and lock geometry stay matched. We’re an independent service provider – not affiliated with Moen – so we source by spec, not by brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Windows & Doors Is Failing
- The handle turns but the door won’t release. The internal latch cassette has worn or the spindle has stripped, usually after years of a door that was never quite aligned.
- The door won’t sit flush against the weatherstrip. The hinges have sagged or the frame has shifted, and a gap at the top corner is the first sign. In Summerlin, that gap lets in both heat and fine dust.
- The multipoint lock only engages at the top. The tie bar between lock points has bent, common on patio doors that get pushed shut rather than slid.
- Grinding or a stiff slide on a patio door. Rollers have flat-spotted or the track has grit in it. A door that fights you is loading the hardware unevenly and will fail faster.
- Finish peeling or pitting on the handle and hinges. Sun exposure breaks down the coating first, then moisture gets under it and the base metal corrodes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Part-only pricing on Moen door hardware runs roughly $40-$250 depending on the piece – a hinge set sits at the low end, a full multipoint lock or handle set at the high end. Labor to remove, fit, and adjust the replacement is where the honest number lives, and most Summerlin jobs of this type land between $150 and $350 installed. If the failure has damaged the door slab or frame, you’re looking at the full window replacement range of $4,500-$15,000, or $8,000-$25,000 for impact window installation. What drives the spread: door style, stile width, whether the frame needs re-squaring, and whether impact-rated glass is specified. You get a written line-item price before work starts – parts and labor itemized separately. Every install carries the 365-Day Done Right Promise: if the hardware we fit fails within a year, we return and correct it at no charge.
DIY or Call Us?
What you can safely check: the model label, the faceplate measurements, whether the door is square in the frame, and whether the track is clean on a slider. That’s it. Where DIY goes wrong on doors is the frame and the glass. Re-hanging a sagging door or prying a multipoint lock out of a jamb can crack tempered or impact glass, and a door that comes off its hinges under tension is a genuine injury risk. Exterior doors also have to keep their weather seal and lock security intact – a door that latches loose after a bad DIY swap is a security problem, not a cosmetic one. If the glass is involved, that’s a two-person, professional job. Call us at (844) 588-0072 to schedule a free estimate and get a written scope before deciding.
FAQs

Realistically 8-12 years on an interior door and 5-8 years on a west- or south-facing exterior door, because the valley sun and seasonal dust accelerate finish wear and hinge sag. If yours is past that and starting to fight you, replacement is usually cheaper than chasing repairs. Call (844) 588-0072 for an exact quote – estimates are free.
Sometimes – a hinge can be re-tightened, a track cleaned, a latch adjusted – but once the internal cassette or tie bar is bent, repair is a short-term patch. We’ll tell you straight whether a fix holds or whether replacement is the honest call. Call (844) 588-0072 for a free assessment.
A single hinge set or handle replacement runs 45 minutes to an hour and a half; a multipoint lock and full adjustment on a patio door runs about 2-3 hours. If the frame needs re-squaring, plan a longer window. Call (844) 588-0072 to schedule and we’ll give you the time in writing with the price.
We identify the Moen model from the label and measurements, then source OEM or an OEM-spec equivalent to match the door’s stile and lock geometry – we don’t claim to carry parts on hand. Your written quote lists the exact part before we order. Call (844) 588-0072 to start the free estimate.
We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side of a remodel, so if a door or window project grows into a broader renovation, the same written-price standard applies. Bradford Remodeling Co Summerlin is a member of the Garrison Partners family, independently owned and operated and held to The Garrison Standard, and a live person answers the phone 24/7. Call (844) 588-0072 for a free estimate on your Moen door or window part – you’ll have the price in writing before any tool comes out.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












