







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Summerlin Owner’s Guide
A Moen bathroom remodel in Summerlin typically runs $9,000 – $28,000 installed, depending on whether you’re keeping the footprint or moving the rough-in, and the fixture package you choose. Small bathroom remodels land between $5,000 and $12,000. Bradford Remodeling Co Summerlin installs Moen fixtures and Moen-compatible components as part of full bathroom remodeling. We’re an independent remodeling contractor, not affiliated with Moen.

Most Summerlin owners find us after a specific failure: a shower cartridge that won’t hold temperature, a Moen single-handle faucet that drips from the spout at rest, or a Posi-Temp valve that throws nothing but cold on the hot side. Those are cartridge and valve-body problems, not faucet problems. Owners often replace the whole fixture before anyone has looked inside the valve at the cartridge. We start with the cartridge.
Which Moen Models This Applies To

Moen bathroom fixtures split into a few families, and the part you need depends on which one you have. The 1222 and 1225 cartridge serve the single-handle Posi-Temp tub and shower valves found in most 1980s-through-2000s homes. The 1200 and 1200B serve older MoenFlow and Chateau single-handle models. Two-handle faucets use a 1234 or 1245 stem depending on age and finish line. Moen shower-only valves in newer construction often use the 1225B with an integrated pressure-balance spool. Getting the wrong cartridge is the single most common compatibility error we see in Summerlin: the valve bodies look identical from the trim side but take different cartridges, and the difference isn’t visible without pulling the old one.
The reliable way to identify your part is to pull the old cartridge and read the stamp on the brass, not the model number on the trim. Trim escutcheons get swapped; valve bodies don’t. OEM Moen cartridges run about $22 – $45 for the standard 1222 and $55 – $85 for the 1225B with the balance spool. Aftermarket equivalents run $8 – $18. Our position: OEM on any pressure-balance valve, because the spool is the part that fails, and we’ve seen aftermarket spools seize within two seasons. Aftermarket is fine on a two-handle basement faucet stem. We don’t carry parts on a truck; we source to the model you actually have.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Bathroom Remodeling Is Failing
These are the symptoms Summerlin homeowners describe when they call us about a Moen bathroom fixture:
- Drip from the spout when the handle is off. The cartridge seals have worn and water is passing the ceramic disc. If the drip started after the handle got stiff, the cartridge is the whole problem.
- Hard to swing the handle, or a grinding feel. Mineral scale has built up inside the cartridge body. Summerlin’s water runs hard enough that cartridge life often runs 6 – 10 years instead of the 12 – 15 you’d see on softer water.
- Water temperature swings when someone flushes a toilet. The pressure-balance spool inside the cartridge has failed. This is a classic 1225 failure and a legitimate scald risk with kids or older adults in the house.
- Weak flow on hot or cold only. One side of the cartridge has scaled shut, or the stop valve behind the wall is partly closed. Pull the cartridge first, because the stop valves are usually fine.
- Water at the base of the shower valve escutcheon. That’s a failed O-ring or a loose bonnet nut, not a cartridge issue. Left alone, water gets behind the tile and into the substrate. In Summerlin, where summer temperatures regularly pass 105°F and the tile goes through hard thermal swings, a slow leak behind the wall dries out unevenly and often shows as a soft grout line or a loose tile before it ever reaches the ceiling below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling in Summerlin runs $9,000 – $28,000. A small bathroom remodel runs $5,000 – $12,000. Shower replacement runs $3,000 – $8,500, and a tub-to-shower conversion runs $3,500 – $10,000. Those ranges cover the full scope, not just the cartridge.
What drives the number up: moving the rough-in, replacing the valve body versus the cartridge only, tile versus a prefab surround, and the vanity. What keeps it down: same footprint, original valve, cartridge-only repair folded into a planned remodel. Every price we quote is written line-item before work starts, and it doesn’t change at the door. The Moen cartridge or valve is a line on that quote with the part number and cost shown. Every completed bathroom carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check a few things yourself: turn the water off at the stop valves, remove the Moen handle and trim escutcheon, and photograph the cartridge face. That photograph tells us and tells you which cartridge you have. You can also feel for play in the handle and check whether the drip stops when you fully seat the cartridge. None of that requires opening the valve body.
Where DIY goes wrong: pulling a stuck cartridge on a pressure-balance valve. The cartridge sits in a brass bore behind tile, and a cartridge that won’t release means prying against the valve body. Crack the body and you’re into the wall and the tile, which turns a $60 part into a $2,000 repair. On old homes, the stop valves behind the wall may not fully close, and a bad seat on a 1225 valve can scald the next person in the shower. That’s the line. Call (844) 588-0072 and we’ll give you a written price before anything comes out of the wall.
FAQs

Six to ten years in Summerlin on hard water, versus twelve to fifteen on softer water. Scale is what kills them, not the ceramic. Call (844) 588-0072 if yours is past that window and starting to show it.
Often yes. If the valve body is intact, a cartridge and O-ring swap restores it, and that’s the cheaper path. If the bore is scored or the body is cracked, the valve comes out, and that’s a rough-in job behind tile. We’ll tell you which one you’re looking at before quoting.
Cartridge only, a couple of hours on site. Valve-body replacement with tile opened and closed runs one to two days. A full bathroom remodel that folds the Moen work in takes weeks, not hours, so plan around that.
We match the cartridge or valve to the number stamped on your valve body, not the trim label, then source the OEM part for that model. Cartridges come from Moen’s parts channel; trim and fixture packages come through our documented brand roster. KraftMaid, Cambria, and Silestone appear on the same bathroom spec sheet when cabinetry and surfaces are in scope. Call (844) 588-0072 for a free estimate.
Every job closes with a clean site, a documented scope, and your signed written guarantee in hand. That’s the standard. Call (844) 588-0072 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












