







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Summerlin Owner’s Guide
Kohler fixtures and finishes in a Summerlin addition or ADU carry manufacturer specs and warranties that survive the desert climate when they’re installed right. A home addition here runs $45,000 – $130,000 and a detached or garage-based ADU runs $90,000 – $220,000, depending on footprint, systems, and finish level. Homeowners usually discover a failing Kohler component the way everyone does: a toilet that won’t stop running, a shower valve that drifts hot, a faucet that drips into the cabinet below, or a ceramic finish that chips around the drain after a hard-water season. We price the whole scope in writing before any work starts, and we stand behind it for a full year. We’re an independent remodeling contractor, not affiliated with Kohler.
Key Takeaways
– Kohler’s model and series numbers decide which part fits. Guessing is where most Summerlin owners get burned.
– Installed parts pricing depends on the part, not just the label.
– Hard water and summer heat cycles shorten the life of certain Kohler components in Summerlin.
– Every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we return and correct it at no charge.
Which Kohler Models This Applies To
Kohler parts don’t cross-fit the way some homeowners assume. A cartridge from a Kohler Forte faucet will not seat in a Bellera body, and the ceramic cartridge for a Memoirs collection faucet differs from the one in a Devonshire. Kohler’s toilet fill and flush valves vary by series too: the Cimarron uses a different canister assembly than the Wellworth, and the Santa Rosa sits on another version entirely. The model number on the part itself is the one that matters, and it’s usually stamped inside the tank lid, on the underside of the faucet body, or on a label under the bowl rim. With that number, matching is straightforward. Without it, we’re comparing measurements and photographs, and the odds of a return trip go up. For Kohler specifically, we order OEM parts first and quote aftermarket equivalents only when OEM is discontinued or back-ordered, and we tell you which one you’re getting before we order. The same sourcing discipline applies to KraftMaid, Cambria, and Silestone materials on these projects.
Signs Your Kohler Home Additions & ADU Is Failing
- The toilet runs for a few seconds after every flush. The flapper or canister seal has degraded. In Summerlin’s hard water, mineral scale stiffens these seals faster than in softer-water regions.
- A faucet drips at the spout when the handle is off. The ceramic cartridge has worn or scaled. Replacing the cartridge usually fixes it; letting it drip wears the seat and turns a $60 job into a $200 one.
- The shower valve drifts hot or cold without input. The pressure-balancing cartridge inside the valve body has failed. This is the most common Kohler shower complaint we see, and it’s also the one with the biggest water-temp safety consequence.
- A ceramic finish has chipped around the overflow or drain. Acidic cleaners and desert water combine to pit glazed surfaces over time. Chips don’t repair; they resurface or you replace the fixture.
- Water stains or rust tracks appear at a fixture joint. A gasket or supply connection has given up. Left alone, this is the one that damages the substrate under the tile.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Replacement Cost & What’s Included
Pricing below is installed, in Summerlin dollars, parts and labor together. It reflects what the actual job costs, not a teaser number.

| Scope | Installed Price Range |
|---|---|
| Single Kohler cartridge or flush valve replacement | $180 – $340 |
| Faucet replacement (Kohler or equivalent) | $250 – $650 |
| Toilet fill/flush valve rebuild | $150 – $300 |
| Shower valve cartridge replacement | $280 – $520 |
| Full fixture replacement (toilet, faucet, shower trim) | $450 – $1,200 |
What drives the range: part availability, whether the valve body needs replacement alongside the cartridge, and access (a cartridge behind a finished wall adds time). We write the price before any work starts and it doesn’t move at the door. Every completed project carries the 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a Kohler faucet cartridge or a toilet fill valve is a reasonable homeowner job if you have the model number, a basin wrench, and you’ve shut off the water and confirmed the supply line is clean. That’s the honest line. Where DIY goes wrong: shower valve cartridges. The retaining clip is small, easily lost, and if the replacement cartridge seats crooked, you get a leak inside the wall that doesn’t show until drywall softens. That’s a plaster-and-paint repair on top of the plumbing repair. Anything involving the valve body itself, the supply line behind the wall, or the electrical work on a bathroom addition goes to a licensed plumber and electrician, period. Call (844) 588-0072 for a free estimate, and we’ll tell you straight whether it’s a parts swap or a bigger scope.
FAQs
How long does a Kohler fixture last in Summerlin? A Kohler faucet cartridge typically lasts 5 – 10 years; in Summerlin’s hard water, expect the shorter end unless the cartridge is flushed periodically. Toilet fill and flush assemblies usually run 5 – 8 years. Faucet bodies and ceramic fixtures outlast the parts inside them and can go 15 – 20 years with care.
Can it be repaired instead of replaced? Yes, in most cases. A cartridge, flapper, or fill valve is replaceable on its own, and the fixture survives. A cracked valve body, a chipped ceramic bowl, or a corroded supply stub is replacement territory. We check the model number and the part before we quote, so you aren’t paying for a full fixture when a $60 part would do.
How long does the swap take? A cartridge or flush valve is a 30- to 60-minute call once the part is in hand. A full fixture replacement is typically 2 – 3 hours. If the part needs ordering from Kohler, plan on 3 – 7 days for delivery. Call (844) 588-0072 for an exact timeline.
How do you source the part? We match the model number and order OEM Kohler parts first. If Kohler has discontinued the part or it’s back-ordered, we quote an aftermarket equivalent and tell you which one before we order. No surprise substitutions.
Call (844) 588-0072 to schedule your free estimate. We answer the phone live, 24 hours a day, seven days a week, and every price we give you is written before any work starts.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












