







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Driveway & Pavers: The Summerlin Owner’s Guide
If your Silestone driveway surface has cracked, shifted, or started separating at the seams, our team installs and repairs the paver and hardscape systems that sit under and around it, with paver driveway installation in Summerlin typically running $7,000 to $18,000 installed depending on square footage and base prep. We can usually assess a failing section within a few days of your call, and we’ll hand you a written price before anyone picks up a tool. Our technicians have up to 22 years of experience with this kind of work.

Most Summerlin owners spot the problem the same way: hairline cracks that started small and grew, a paver that rocks underfoot when you cross the driveway, or a section that now sits a quarter-inch lower than the rest after a monsoon season. The part fails quietly in our heat before it fails visibly, so by the time you see it, the base is usually involved.
A quick note on who we are: Bradford Remodeling Co Summerlin is an independent remodeling contractor. We install and repair hardscape systems for Silestone product owners, and we are not affiliated with Silestone.
Key Takeaways
- Paver driveway installation in Summerlin runs $7,000 to $18,000 installed; driveway replacement runs $5,000 to $14,000.
- Seam separation and base settling are the two failures we see most in Summerlin, and both trace back to base prep and drainage.
- Every completed hardscape job carries the 365-Day Done Right Promise – a full-year written guarantee.
- We don’t carry parts on a truck. We source what your system needs and give you the written price first.
Which Silestone Models This Applies To

Silestone is best known as an engineered quartz surface, and the same dense, low-porosity mix that makes it a popular countertop and exterior cladding material is why some Summerlin owners have it on driveways, walkways, and paver systems as a decorative or hardscape application. When we talk about “your Silestone model,” we mean the specific product family and finish you have: whether it’s a slab-format cladding, a fabricated paver, or a paneled surface over a concrete or gravel base.
To identify what you have, check three things. First, look for a manufacturer label or stamp on the back of a loose piece or on the underside of a panel – Silestone products carry batch and series markings. Second, measure the thickness of the piece. Third, measure the joint width between pieces; that number tells us what expansion allowance the system was designed for, which matters a lot in Summerlin’s heat cycles. If those three numbers don’t match the replacement piece you’re considering, it won’t seat right no matter how good the install is.
On the OEM-versus-aftermarket decision: for Silestone specifically, we recommend going OEM where the piece is visible and monolithic, because color and finish matching across a family is nearly impossible with an aftermarket equivalent. For base materials and bedding sand, a quality aftermarket product is fine, and often better suited to local conditions. We work from a documented roster of name brands – Belgard and Unilock among them for hardscape, plus KraftMaid, Cambria, and Kohler on the interiors side – so the spec is traceable and the manufacturer warranty still attaches.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Driveway & Pavers Is Failing
- Hairline cracks widening over a season. Differential settling in the base is the usual cause, not the surface piece itself. Our desert soil moves when it wets and dries, and a thin or poorly compacted base lets the surface flex until it cracks.
- Paver edges rocking or “see-sawing” underfoot. That’s a void under the piece. Bedding sand has washed out or never compacted properly. Left alone, the piece will crack and take its neighbors with it.
- Seams separating 1/8 inch or more. Expansion joints are doing their job in the heat but the base has shifted. In Summerlin we see this most on south- and west-facing driveways that take direct afternoon sun.
- Efflorescence – the chalky white bloom on the surface. Moisture is migrating up through the system. It’s cosmetic at first, but it points to a drainage problem that will undermine the base.
- Standing water or a low spot after rain. Slope has changed. Our monsoon patterns expose this fast. A driveway that pools water is a driveway that will fail from below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest pricing picture for Summerlin, installed. These are the ranges we quote, and the number in your written estimate holds.
| Job | Installed Range |
|---|---|
| Paver driveway installation | $7,000-$18,000 |
| Driveway replacement | $5,000-$14,000 |
| Concrete driveway installation | $4,500-$12,000 |
| Paver patio installation | $3,500-$11,000 |
| Driveway sealing (maintenance) | $250-$700 |
What drives the range: square footage, how much of the base has to come out and be rebuilt, drainage corrections, and whether we’re matching an existing Silestone family or replacing the whole run. Base prep and compaction are the single biggest cost driver, and it’s the part you can’t skip. Our quote is line-itemed – materials, labor, disposal, and base work all spelled out before work starts, no numbers that move at the door. Every completed job is covered by the 365-Day Done Right Promise: if it doesn’t hold inside that year, we come back and correct it at no charge.
DIY or Call Us?
There’s a safe line here, and it’s worth respecting. You can absolutely check for hollow spots by tapping across the surface with a screwdriver handle, look for the white bloom of efflorescence, and note where water pools after a rain. That information is useful and we’ll ask for it when you call.
Where DIY goes wrong: lifting and re-bedding pieces, re-leveling a settled section, and fixing drainage. That’s where amateurs turn a $400 repair into a full replacement, because once a piece is out, the base underneath is exposed and the wrong move there means the whole run fails in one summer. We’ve fixed enough of those attempts to tell you it’s cheaper to have it done right the first time. If you want a straight answer on your Summerlin driveway, call (844) 588-0072 and we’ll tell you whether it’s a repair or a replacement – with a written price.
FAQs

How long should a Silestone driveway and paver system last in Summerlin? A properly installed system should give you 20 to 30 years, but base prep is the deciding factor. In Summerlin’s climate, where surface temps on a west-facing driveway can climb well past 140°F in July, a thin or uncompacted base cuts that lifespan in half. We build the base to hold, and back it with the 365-Day Done Right Promise. Call (844) 588-0072 to schedule a free assessment.
Can it be repaired instead of replaced? Often, yes. If the failure is isolated – one rocking piece, a single separated seam – we can lift, re-bed, and re-set the affected section without touching the rest. Full replacement only makes sense when the base has failed across the whole run. We’ll tell you which one you’re looking at, in writing.
How long does the swap or repair take? An isolated repair is usually a one-day job. A full paver driveway installation runs three to six days depending on square footage, base depth, and weather. You’ll have the schedule in writing before we start, and we keep the site clean and walkable each evening.
How do you source the replacement parts? We don’t stock parts and we don’t carry them on a truck. We measure and identify your Silestone family and finish, then source the matching pieces and the specified base materials from manufacturers with documented specs and warranties. That traceability is what keeps your manufacturer warranty intact and lets our guarantee stand behind the work. If a part can’t be matched, we’ll say so before you commit to anything.
Ready for a written price on your Summerlin driveway and paver work? Call Bradford Remodeling Co Summerlin at (844) 588-0072 for a free estimate. We answer live, 24 hours a day, and every price you get is in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












