







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Kitchen Remodeling: The Summerlin Owner’s Guide
If your Silestone countertops are still sound but the kitchen around them has failed, replacing or refacing the cabinets and rebuilding the surrounding surfaces typically runs $14,000 – $45,000 installed in Summerlin. We can usually assess a failing kitchen within days of your call, and we put the price in writing before anything is ordered or cut. Most Summerlin owners first notice the problem as a soft spot under a counter overhang, a cabinet door that won’t stay shut, or a crack that appears at a Silestone seam after a hot summer.

The pattern matters. When one part of a kitchen fails, the rest usually tells you why it failed.
Key Takeaways
- Silestone slabs survive Summerlin heat; the cabinets and substrate underneath them often don’t.
- A Silestone reuse or re-face project in Summerlin runs $14,000 – $45,000 depending on cabinet scope and island work.
- Every Bradford Remodeling Co Summerlin project carries the 365-Day Done Right Promise, in writing.
- We’re an independent remodeling contractor, not affiliated with Silestone.
Which Silestone Models This Applies To

Silestone is Cosentino’s engineered quartz, and the brand is sold by collection name rather than by model number. The collections Summerlin homeowners most often ask us about are Calacatta Gold, Eternal Marfil, Blanco Maple, Lagares, and Charcoal Soapstone. Cosentino publishes a spec sheet for each collection with slab dimensions, thickness options, and surface finish, and that sheet is what we work from when we match new cabinetry, island support, or backsplash to a countertop you’re keeping.
Here’s the compatibility detail most crews skip. Standard Silestone slabs are 56.5 by 120 inches at 20mm or 30mm thickness. Some collections and finishes ship at different dimensions, and a 30mm slab on a wide island overhang needs solid substrate support, not just brackets. If you’re reusing a Silestone top in a Summerlin kitchen, we measure your existing slab and photograph any seam placement before specifying a single cabinet. That’s how we avoid ordering a cabinet run that doesn’t align with a seam you already have.
The OEM-versus-aftermarket call depends on what you’re replacing. For Silestone itself, there’s no aftermarket “Silestone-quality” slab worth comparing; the original product is the product. For the cabinets and support structure under it, there are real choices: KraftMaid and Wellborn stock cabinetry are documented lines with manufacturer specs, and we price both against each other so you see the difference on paper. Cabinet hardware, drawer slides, and sink flanges use well-matched aftermarket equivalents where it lowers your cost without lowering the standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Kitchen Remodeling Is Failing
- Seams widening in May and June. Summerlin’s dry heat and sharp day-to-night temperature swings cause cabinet frames and the substrate under a quartz top to expand and contract. A seam that opens a hairline gap in spring usually traces to substrate movement, not the Silestone itself.
- Soft or spongy spots under a peninsula or island. Water damage from a sink or dishwasher leak rots the substrate. The Silestone reads fine from above; the top feels bouncy when you lean on it.
- Cabinet doors that drag or won’t stay closed. In Summerlin’s heat, particleboard cabinet boxes can swell at the hinges. Door alignment that fails seasonally points to cabinet failure, not hinge failure.
- Cracks at the corners of a sink cutout. This is almost always an unsupported overhang. Silestone needs proper substrate support around a cutout, and a cantilevered section without it cracks over time.
- A backsplash pulling away from the wall. Caulk joints and adhesive fail behind a hot range or under a brightly sunlit window. Water intrusion at that gap damages the wall behind the counters.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a Silestone-driven kitchen remodel runs in Summerlin, and what’s inside each range.
| Scope | Summerlin range |
|---|---|
| Full kitchen remodel (cabinetry, surfaces, island) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation or refacing | $4,000 – $13,000 |
| Countertop installation (new Silestone) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: whether we reuse your Silestone or install new, the linear footage of cabinetry, island size, and whether electrical or plumbing moves. The Springfield, The Ridges, and Red Rock Country Club homes we work in often carry larger islands, which push toward the top of the range. Every price is written before work starts and doesn’t move at the door.
All completed work carries the 365-Day Done Right Promise. If the cabinetry, substrate, or installation fails within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely do three things before calling. Photograph your Silestone slab and any seam from above and below. Check cabinet toe kicks and the floor under a sink for water staining. Measure your island and peninsula overhangs so you know where the support question lies.
Where DIY goes wrong: quartz slabs are heavy, brittle, and unforgiving. Silestone slabs are dense engineered stone and simply cannot be pried up or moved without proper equipment and training. Disconnecting a sink, moving a gas line, or pulling an island to check substrate support behind it is where a weekend project turns into water damage or a broken slab. Give us a call at (844) 588-0072 and we’ll walk you through what’s likely wrong before you touch anything.
FAQs

How long does Silestone last in Summerlin heat? Silestone is engineered quartz and typically lasts 15 years or more with normal use. The reason most Summerlin owners replace it isn’t the slab; it’s the cabinets and substrate under it failing from heat, water, or inadequate support.
Can the Silestone be repaired instead of replaced? Often yes. A crack or a failed seam can be repaired, and if the slab is sound we can reface the cabinets or rebuild the substrate and keep your original Silestone. We’ll tell you which option saves more when we assess the kitchen.
How long does the swap take? A cabinet refacing with your Silestone reused typically runs 3 to 6 working days. A full Summerlin kitchen remodel with new surfaces runs 2 to 4 weeks, and the timeline is written into your scope before work starts.
How do you source the cabinets and parts? We work from a documented roster of name-brand materials, including KraftMaid and Wellborn cabinetry, Cambria surfaces, and Kohler fixtures alongside Silestone. Every spec is traceable to a manufacturer sheet, so if it fails, there’s a written warranty on both sides.
Call (844) 588-0072 to schedule your free estimate. A live person answers any hour, and you’ll have a written price in hand before a single cabinet is ordered.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












