







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Driveway & Pavers: The Summerlin Owner’s Guide
Cambria doesn’t manufacture driveways or pavers. What a Summerlin homeowner is actually dealing with is the hardscape that sits around a Cambria-surfaced entry, courtyard, or outdoor kitchen, or a Cambria-branded paver product a prior contractor spec’d alongside the stone. Cambria is a quartz surface brand, and its role in a driveway and paver project is as the adjoining hardscape material at the entry, walkway, or approach, not as the driveway paving itself. Paver driveway installation in Summerlin runs $7,000 – $18,000 installed, and we can typically get a written quote back to you quickly once we see the scope.

Owners usually notice the failure in one of two ways. First, the pavers along the Cambria-to-driveway transition start to heave or settle, leaving a lip the size of a thumb at the walkway edge. Second, when a contractor quotes the driveway paving, nobody says plainly what the Cambria surface is, what’s under it, and what happens to that transition when the paver base is rebuilt. Left alone, the transition shifts season after season and the joint between the stone and the pavers opens wider each year.
Bradford Remodeling Co Summerlin is an independent service provider. We are not affiliated with Cambria, and we don’t sell their products. We install and rebuild hardscape, and we spec Cambria alongside it when the project calls for that, using a documented roster of named brands so the material and warranty trail stays traceable. We carry Belgard and Unilock pavers among others, and we put the price and the guarantee in writing before any tool comes out.
Key takeaways
- Cambria makes quartz surfaces, not driveway paving. The paver portion is the driver; Cambria is the adjoining stone.
- Summerlin paver driveway installation runs $7,000 – $18,000 installed, depending on square footage, base depth, and edge restraint.
- The failure point is almost always the transition and the base under it, not the surface itself.
- Every Bradford project gets a written price before we start and the 365-Day Done Right Promise after.
Which Cambria Models This Applies To

Because Cambria is a quartz surface line rather than a paver manufacturer, “model compatibility” here means matching the stone family at the transition zone to the paver material, base, and edge restraint. Cambria’s residential surface lines include the Marble Collection, the Desert Collection, the Signature Collection, and the Coastal Collection, each with its own slab thickness and finish. Most exterior conditions call for a specific thickness and a textured finish so the stone holds grip when wet. That stone meets the paver field, and the joint between them is where compatibility gets decided.
How to identify what you have. The Cambria stone at your entry or courtyard will typically have a sample label or a paperwork trail from the original install with a collection name on it. If the label is gone, measure the slab thickness at the exposed edge; exterior Cambria work is commonly spec’d in a thicker profile than interior countertops, and that measurement tells a contractor what paver elevation will sit flush. Photograph the transition, the edge restraint, and the base material under a lifted paver. Those three photos identify the assembly faster than any model number.
The OEM-versus-aftermarket question for Cambria doesn’t apply the way it would for a garage door part. There is no Cambria-branded driveway part to replace. What does apply is the paver spec and the base spec. A matching Belgard or Unilock paver in the same nominal dimensions, thickness, and texture is the right call when the original paver is discontinued. The compatibility gotcha is the base: Summerlin’s caliche-heavy soil and the reactive clay under the southern valley areas behave very differently than the clean, compacted base spec that produced the original install’s numbers. Rebuild the base wrong and the paver field moves under the Cambria stone within one or two summers of summer heat cycles. That is where jobs fail, not at the paver itself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Driveway & Pavers Is Failing
Hardscape fails in a predictable order. The symptoms below are how Summerlin owners typically describe it.
- Heaving or settled pavers at the stone transition. The paver field has moved relative to the Cambria slab, opening a lip or a gap. In most cases the base under the pavers has shifted or lost compaction, not the stone. This is the most common failure we see.
- Joint sand washing out at the edge. The sand between pavers is disappearing along the Cambria joint, especially on the low side of the slab. Water is running under the edge rather than off it, and the joint has become a drain. Left long enough, that water undermines the base.
- Efflorescence: white chalky bloom on the pavers. Mineral salts are migrating to the surface, usually because the base is holding moisture it shouldn’t. The bloom itself is harmless; the moisture source behind it is the signal worth reading.
- Edge restraint pulling loose. The paver edge that meets the Cambria stone has lost its restraint, and pavers are spreading into the gap. Once the edge lets go, the joint opens fast and the field follows.
- Slab cracks or a visible height difference at the joint. The Cambria stone and the pavers are no longer flush. Either the slab has settled or the paver field has risen. Both point back to the base and the transition detail.
Summerlin’s UV load and the big temperature swing between a summer afternoon and an overnight low both work on these joints. A joint that’s tight in May opens by August. The seasonal reality is that this failure accelerates, not evens out.
Replacement Cost & What’s Included

What you’ll actually pay for paver driveway and hardscape work in Summerlin, installed. These are the same market-calibrated ranges we quote across the valley.
| Scope | Installed price range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway installation | $4,500 – $12,000 |
What drives the range: total square footage, base depth (deeper base for the soil here, which costs more and lasts longer), paver brand and thickness, edge restraint material, and whether drainage has to be rebuilt. The Cambria stone itself is already in place in most of these jobs; it’s the paver field and the base under it that’s being rebuilt.
Every quote is line-itemed: parts, labor, base, disposal, and any drainage work, separated. No numbers that move at the door. The written price comes before any work starts, every time. And the work carries the 365-Day Done Right Promise: a full-year written guarantee, and if the paver field or the transition fails inside that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check safely. Lift a single paver at the transition, photograph the base underneath, and note whether it’s clean compacted material or wet, chalky soil. Measure the lip between the Cambria slab and the pavers. That photo and that measurement are the two things any contractor needs to quote accurately, and inspecting them yourself is safe and worth doing.
Where DIY goes wrong is the rebuild. This work involves lifting a paver field, excavating and re-compacting a base to depth, resetting edge restraint, and re-setting hundreds of square feet of pavers so the transition stays flush through a Summerlin summer. Doing that on top of substandard base, or without re-compacting to spec, means the same failure returns within a season. The cost of a failed redo is more than the original install. If you’re on the fence, don’t tear into it. Call us at (844) 588-0072 for a free estimate. We’ll walk the transition with you and put the price in writing.
FAQs

A correctly installed paver field with a properly compacted base and a flush Cambria transition typically holds 15 to 25 years in the Las Vegas valley; the base detail is what decides where you land in that range. Summerlin’s UV load and summer temperature swings are hard on joints and edge restraints, so the transition joint is usually the first thing to need attention, not the pavers. Call (844) 588-0072 for a free estimate on your specific install.
Yes, in many cases. If the pavers themselves are sound and the failure is isolated to the transition and the base under it, we can lift the affected field, rebuild the base and edge restraint, and reset the pavers without replacing the whole driveway. Repair runs lower than the full $7,000 – $18,000 range. Call (844) 588-0072 for a free estimate and we’ll tell you honestly whether the job is a repair or a rebuild.
A transition repair or a partial paver rebuild typically runs one to three days depending on square footage and how much base has to be re-compacted. A full paver driveway install runs longer, usually a week or more. We give you a written schedule with the written price before we start. Call (844) 588-0072 to schedule your free estimate.
We spec from a documented roster of named manufacturers: Belgard and Unilock pavers, plus Cambria quartz surfaces, with manufacturer specs and warranties on file so the material trail is traceable. Where an original paver is discontinued, we match on dimensions, thickness, and texture so the new field reads consistent with the Cambria stone at the transition. We don’t claim to stock parts or carry them on a truck. Call (844) 588-0072 for a free estimate, and we’ll bring the range and the brand options to you in writing.
Squared Away, in Writing
Bradford Remodeling Co Summerlin is a member of the Garrison Partners family, established in 2004, independently owned and operated and held to The Garrison Standard. Every project gets a written price before work starts, a live person answers the phone at (844) 588-0072 around the clock, and every completed job is squared away at close: clean site, documented scope, and the signed 365-Day Done Right Promise in your hand. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed on every job. We also work with KraftMaid, Silestone, and Kohler on interior projects. Call (844) 588-0072 today for your free estimate on your Summerlin driveway and paver work.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












