







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling: The Summerlin Owner’s Guide
Cambria quartz kitchen remodeling in Summerlin typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop square footage, and whether the project is a cosmetic refresh or a full gut. We handle the whole scope: cabinetry, Cambria surfaces, backsplash, island, and fixture swaps, all priced in writing before anything is ordered. Bradford Remodeling Co Summerlin is an independent contractor, not affiliated with Cambria.

Most Summerlin owners don’t find out something is wrong with their kitchen until a seam opens, a cabinet box sags away from the wall, or a countertop edge starts looking tired against new paint. The discovery usually starts small: a hairline crack near the sink cutout, a door that won’t sit flush after ten years of desert heat cycling, a backsplash grout line that’s gone dark. That’s when the call comes in. In Summerlin specifically, we regularly see quartz seams over dishwashers flex and fail because the cabinet run underneath wasn’t shimmed level during the original install, and the problem surfaces three or four summers later.
Which Cambria Models This Applies To

Cambria is a quartz surface brand, not a cabinet line, so “Cambria compatibility” really means matching the slab series, thickness, and edge profile to the substrate and cabinetry underneath. Cambria slabs are typically 2 cm or 3 cm thick, and the difference matters: 2 cm material almost always needs a full plywood subtop for support, while 3 cm can often sit on cabinet rails alone. If your existing kitchen used 2 cm Cambria on a subtop, we have to account for that 1 to 1.5 inches of build-up when we plan new cabinet heights, or your counter will end up too tall for standard dishwasher clearance.
The other compatibility trap is edge profile and seam placement. Cambria slabs come in specific jumbo and standard dimensions, and where the fabricator places seams determines whether a book-matched or waterfall look is even possible without buying extra material. We measure the actual room and check the slab yield before quoting, rather than promising a layout the material can’t deliver.
On the OEM-versus-aftermarket question: Cambria must be fabricated and installed by Cambria-approved fabricators to keep the manufacturer warranty intact. That’s not a hard sell, it’s just how the warranty works. Our team coordinates with authorized fabricators so your slab warranty stays valid. For cabinetry, backsplash, and fixtures we work with KraftMaid, Silestone, and Kohler, among others, all documented brands with traceable specs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Kitchen Remodeling Is Failing
- Seams that flex or gap over time. Quartz seams shouldn’t move. When they do, it’s usually uneven cabinetry or a missing subtop letting the slab deflect under load.
- Cracks radiating from sink or cooktop cutouts. Cutouts remove support right where stress concentrates. A crack here often means the fabricator cut too close to the edge or skipped reinforcement.
- Cabinet doors that won’t stay adjusted. In Summerlin’s dry heat, particleboard cabinet boxes swell and shrink seasonally. Hinges lose their bite because the screw holes have wallowed out.
- Backsplash grout darkening or separating. Movement between the counter and the wall shows up first in the grout line. It’s not just cosmetic; it usually means the counter has shifted.
- Water staining under the sink base. Even a slow drip rots a cabinet floor in a couple of years. Quartz itself doesn’t absorb water, but the substrate beneath it does.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full kitchen remodeling in Summerlin lands at $14,000 – $45,000 for the whole scope. If you’re isolating parts of it, the line items break out like this:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves on square footage, whether plumbing or electrical has to be relocated, cabinet grade, and Cambria slab selection. Every quote is a written price before work starts, with no numbers that move at the door. Parts and labor are itemized so you can see what you’re paying for. All completed work carries the 365-Day Done Right Promise: if it fails within the year, we return and correct it at no charge.

DIY or Call Us?
Some of this is easy to check yourself. Open cabinet doors and push on the boxes; if they shift against the wall, the fasteners are loose. Run a level across the counter and look for gaps. Shine a flashlight along the backsplash seam. Those checks cost nothing and tell you whether you have a real problem.
What you shouldn’t do yourself: pulling a Cambria slab off a cabinet run. Quartz is heavy, brittle, and unforgiving of a bad lift. A 3 cm slab can weigh 10 – 12 pounds per square foot, and a dropped slab shears instantly. Removing one safely also means cutting the silicone, protecting the opposite wall, and having the right hands on the corners. Cabinet and counter work also has to be sequenced correctly or you’ll redo it. This is a two-person, know-the-sequence job. If the inspection turns up movement, call (844) 588-0072 for a free estimate.
FAQs

Cambria quartz itself should last 25 years or more in normal kitchen use. What fails long before the slab is the substrate and cabinetry holding it up. In Summerlin, the dry heat and big seasonal swing between summer highs and cool winter mornings work on wood and particleboard, not on quartz. If the cabinets hold, the counter holds.
Sometimes. A small, stable seam gap or chip near an edge can often be color-matched and filled, and it holds up reasonably well. A crack that runs to a cutout can’t be trusted with a fill because the stress that caused it is still there. We look at the cause before recommending repair or replacement, and tell you honestly if repair is the better call.
Countertop-only replacement runs a few days including template, fabrication, and install. A full kitchen remodel in Summerlin typically takes several weeks, and we’ll give you the schedule in writing up front. We don’t promise one-day turnarounds on a job like this.
Through Cambria-approved fabricators, so the manufacturer warranty stays intact. We handle the slab selection with you, confirm dimensions and yield before ordering, and document the spec.
Call (844) 588-0072 for a free estimate. We’ll measure, price it in writing, and tell you exactly what’s failing and why before anyone picks up a tool.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












