







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Summerlin Owner’s Guide
In Summerlin, a Wellborn kitchen remodeling project typically runs $14,000 – $45,000 installed, and the timing depends on cabinet lead times rather than labor. Homeowners usually find us because a door has swollen shut, a drawer glide has failed under the weight of a cast-iron pan stack, or a cabinet box has pulled away from the wall along a stud line. Those are not cosmetic problems. In Summerlin’s dry climate, wood cabinet components move differently than they do in humid markets, and a part that was sized correctly at the factory can shift out of true within a few desert seasons. Our technicians have up to 22 years of experience reading exactly those failure patterns, and we install Wellborn-compatible cabinetry and the parts that keep it working.

We’re Bradford Remodeling Co Summerlin, and we’re an independent service provider, not affiliated with Wellborn. If you have a Wellborn product that’s failing, this page is the one to read before you call anyone.
Key Takeaways
- Wellborn cabinet parts are not universal. The drawer glide or hinge on a Hanover door may not fit a Chandler or Bristol door, even in the same finish.
- Summerlin’s low humidity and big temperature swings between day and night are the most common cause of cabinet part failure here.
- Installed kitchen remodeling for Summerlin homeowners typically lands between $14,000 and $45,000, based on scope and cabinet line.
- We don’t carry parts on a truck or hold inventory. We source the correct part, then install it. We quote the full job in writing first.
- Every project we complete carries the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Wellborn Models This Applies To
Wellborn’s cabinet lines are organized by series and by door style within each series. The hardware that ships on a Hanover raised-panel door is not the same hardware on a Chandler slab or a Bristol shaker. Hinge bore spacing varies by series, drawer glide brackets are keyed to specific box depths, and toe-kick heights differ between standard and taller base cabinet builds. If you’re trying to match a part, the model number is stamped on a label inside the cabinet door or on the inside of the cabinet box. Photograph that label before you call anyone.
If the label is gone, the measurement to record first is the drawer glide screw-to-screw distance on the cabinet side, then the drawer box width, then the door overlay. Those three numbers narrow the field fast. The OEM-versus-aftermarket choice comes down to fit and finish. A genuine Wellborn replacement part matches the factory bore pattern and finish exactly. A quality aftermarket equivalent can work well if the measurement matches, but only if the measurements are confirmed first. We don’t guess between them. We measure, document, and install what fits.
Signs Your Wellborn Kitchen Remodeling Is Failing
Cabinet part failure in Summerlin follows predictable patterns. Here’s what usually signals it:
- The drawer sticks or won’t close flush. On Wellborn cabinets, a glide that has lost tension or worn at the roller is the usual cause. It drags against the cabinet side, causing the drawer to bind mid-travel.
- A door sags and catches the frame. The hinge plate or hinge arm has loosened from the cabinet face. In Summerlin, seasonal wood movement can open the screw hole slightly, letting the hinge drift out of adjustment.
- A shelf has cracked down the center. Particleboard or plywood shelves under heavy loads fail at the center span. Summerlin’s dry air worsens this, because the material dries and loses some of its flex tolerance over time.
- The drawer runner has separated from the box. That’s a bracket or glide failure, and it usually means the drawer was overloaded or the runner was undersized for the load.
- A cabinet box has pulled away from the wall. The box is fine; the fasteners are not. This happens most often along a stud line that has shifted slightly with seasonal temperature change.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Summerlin homeowners, a full kitchen remodeling project involving Wellborn cabinetry typically runs $14,000 – $45,000 installed. A smaller kitchen remodel runs $9,000 – $20,000. Cabinet installation alone runs $4,000 – $13,000, and that’s the line to look at if you’re replacing failed cabinet parts or boxes rather than the whole kitchen. Countertop installation runs $2,000 – $6,500, and a backsplash adds $800 – $2,500.
What drives the range: cabinet line and door style, cabinet count, whether we’re replacing boxes or just hardware, and countertop material. We also install KraftMaid, Cambria, and Silestone, so you can compare cabinet and surface options under one written quote. The price we give you is written before any work starts, and it doesn’t move at the door. Parts and labor are itemized separately, so you can see exactly what the material costs and what the installation costs. Every completed project is covered by the 365-Day Done Right Promise: if the work fails inside a full year, we return and correct it at no charge to you.
DIY or Call Us?

Some checks are safe for you to do. Tightening a loose hinge screw, adjusting a drawer glide with a screwdriver, or confirming the cabinet label so you have the model number ready. That’s all fine and it saves time.
Where it goes wrong: cabinet boxes are attached to the wall through studs, and the fasteners carry real weight. If a box is pulling away, the structural fasteners are your load-bearing connection. A homeowner who replaces the screws with the wrong length or drives them into drywall only, not into the stud, has created a genuine risk of the cabinet coming down. That’s not a task to improvise. The same applies to countertop work and any plumbing or electrical service that runs through the cabinet wall. We’re not saying you can’t touch it. We’re saying that if the cabinet box is shifting, stop there and get a professional to look at it. It’s a short, honest conversation and it costs less than a failed cabinet.
Call (844) 588-0072 for a free estimate. We’ll confirm what failed, what part you need, and give you a written price before any work starts.
FAQs
A factory-spec hinge or glide on a Wellborn cabinet should give you 10 to 15 years under normal use in Summerlin. The low-humidity climate here can shorten glide life if the cabinet is near a heating vent or a south-facing window where temperature swings are sharpest. If your hardware has failed earlier than that, check for binding and overloading. Call (844) 588-0072 for a free estimate if the part is failing before its time.
Sometimes yes. A loose hinge plate can often be re-anchored with a longer screw and a dab of wood glue in the hole. A glide that’s lost tension can sometimes be reset. But a cracked shelf or a drawer box that has separated from its runner is a replacement, not a repair. We’ll tell you which one you’re facing, honestly, once we’ve looked at it. Call (844) 588-0072 to schedule a free estimate.
A single hinge or glide swap takes under an hour. A cabinet door replacement is usually a same-day visit. A full drawer box or multiple hinges typically takes two to four hours. A full kitchen remodeling scope is scheduled in phases over several days, and we write the timeline into the quote before work begins. Call (844) 588-0072 for a free estimate and a written schedule.
We source parts based on the model number label inside your cabinet or the measured screw-to-screw and drawer-box dimensions, then order the correct part to fit that specification. We don’t carry parts on a truck or hold cabinet part inventory in Summerlin. That means we quote the part and installation together in writing, you see the price before we order anything, and we install it once it arrives. Call (844) 588-0072 to start the process.
About Bradford Remodeling Co Summerlin

We’re part of the Garrison Partners family, independently owned and operated, and held to The Garrison Standard. That standard means a written price before any work starts, background-checked and uniformed technicians on every job, and a live person answering the phone around the clock, not a voicemail. When we close a job, you get a clean site, a written scope, and the 365-Day Done Right Promise in your hand. The Garrison Code is the framework behind every promise we make, and it’s what keeps a Summerlin kitchen project squared away from the first measurement to the final walk-through.
Call (844) 588-0072 to schedule your free estimate. We’ll confirm what’s failing on your Wellborn cabinetry and put the full price in writing before a single tool comes out.
Written by the team at Bradford Remodeling Co Summerlin, serving Summerlin and nearby areas.












