







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Boulder City, NV
We provide independent Tremron paver installation and repair across Boulder City, from historic-core driveways to patio rebuilds on mid-century infill lots. What makes our Tremron work different here is the base: Boulder City’s dam-era lots were laid out in the 1930s, so a paver overlay often turns into full base reconstruction once excavation starts. We quote for what’s actually under the driveway, in writing, before any tool comes out.

Bradford Remodeling Co Summerlin is an independent Tremron service provider. We’re not affiliated with or authorized by the manufacturer. Our technicians have up to 22 years of experience specifying Tremron service for desert conditions, every job comes with a written price up front, and every completed project carries the 365-Day Done Right Promise. Call (844) 588-0072 for a free estimate on your Boulder City paver project.
Why Boulder City Residents Choose Us for Tremron Service

Our technicians have worked with Tremron pavers long enough to recognize their failure patterns on sight: the efflorescence bloom, the washed-out joint, the edge that’s crept a half-inch past its restraint after monsoon season. We know Tremron’s profile families because we’ve installed and repaired them, not because a spec sheet told us to. That matters on tight Boulder City lots where a repair has to blend into a run of pavers laid decades apart.
We use OEM-compatible Tremron edge restraints and polymeric joint sand matched to your existing profile, so repairs read as repair, not patch. Parts get sourced per job against the actual existing product, and we tell you plainly when a field is worth resetting versus when the base has failed and the honest answer is replacement. No numbers that move at the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Tremron Construction Problems We Solve in Boulder City
- Efflorescence bloom on concrete pavers. Monsoon runoff and irrigation overspray leave mineral salts sitting on the surface and in the joints. On the deep desert heat of a Boulder City summer, that bloom bakes in fast if it isn’t cleared and the joints aren’t maintained.
- Joint sand washout and paver shifting. Driveways and patios where the original grading never accounted for flash-flood sheet flow from surrounding washes. The paver stays sound; the joint and base underneath give out.
- Sun-baked color fade and surface spalling. Decades of intense UV without a reseal cycle will dull older Tremron pavers and start spalling the surface. The dry climate preserves wood and stucco but bakes pavers and sealants much faster.
- Edge restraint failure and creeping displacement. Pavers set against aging 1930s-1950s concrete or block without proper base compaction will walk. We reset against a properly compacted base and re-anchor the edge restraint.
- Base failure under a historic-district overlay. Shallow original concrete aprons and undocumented utility runs shift underneath, which turns what looked like a resurfacing job into a base rebuild once you open it up.
Tremron Service in Boulder City: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes nearly every Tremron job in Boulder City: the town’s historic-district lots were platted for dam-worker housing in the 1930s, so driveways and patios frequently sit on original shallow concrete aprons with undocumented utility runs under them. That’s not a Boulder City rumor. It’s a physical constraint you hit with a shovel. On a normal paver overlay, you scrape, compact, set restraint, and lay. In the historic core, that shallow apron often can’t carry proper base depth, and the old utility runs mean you can’t just excavate without confirming what’s down there. So we inspect before we quote. A qualified local pro pulls back the affected field, re-compacts and re-grades the base for actual drainage, resets the Tremron pavers on a proper edge restraint, and re-sands the joints with polymeric sand. The whole job is base work with pavers on top. Boulder City’s grading rules and historic-preservation review add another step most out-of-town crews don’t plan for.
Tremron Models & Products We Service in Boulder City
We work across the Tremron lines most common on Boulder City properties: Olde Towne pavers, the Stonegate Collection, Mega Olde Towne pavers, and the Bristol Collection. Olde Towne and Mega Olde Towne show up most often on driveways and patios here, and matching a discontinued or weathered color run takes some hunting. We source OEM Tremron pavers, edge restraints, and polymeric joint sand per job to match your existing profile. We don’t keep a local stock and won’t promise you same-day parts. What we can promise is an honest answer on repair versus replace, and a written line-item price before any work starts.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Boulder City

What you’ll pay depends on how deep the base work goes. A straight paver driveway on a sound base runs less than a historic-district rebuild where the original apron has to come out first. Here’s the range for the work we do most in Boulder City:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
Cost drivers: total square footage, base depth and compaction needed, how much of the original apron has to come out, edge restraint length, and whether historic-preservation review applies. A free estimate includes a look at the existing base and grading, a written line-item price, and a clear statement of what the 365-Day Done Right Promise covers on your job. Call (844) 588-0072 for an exact quote. Estimates are free.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Tremron Construction in Boulder City
Are you authorized by Tremron? No. Bradford Remodeling Co Summerlin is an independent Tremron service provider and is not affiliated with, authorized by, or sponsored by the manufacturer. We specify Tremron products because they’re engineered for desert conditions, not because any manufacturer endorses us. Call (844) 588-0072 to talk through your project.
Do you use OEM Tremron parts? Yes. We source OEM Tremron pavers, edge restraints, and polymeric joint sand matched to your existing profile. That’s what lets a repair blend into the surrounding field instead of reading as a patch. Parts are sourced per job. Call (844) 588-0072 for an estimate.
How long does a Tremron paver job take in Boulder City? A typical paver patio runs several days to about a week, depending on size and base condition. A driveway with full base reconstruction takes longer because excavation and re-grading have to be done right before the pavers go down. Historic-district jobs add permitting and review time.
Which Tremron models do you cover? Olde Towne pavers, Mega Olde Towne pavers, the Stonegate Collection, and the Bristol Collection. That covers the large majority of existing Tremron installs in Boulder City and the surrounding area. If you’re unsure which line you have, we can identify it during the estimate.
Why does my Tremron paver driveway keep losing joint sand after monsoon season? Because the grading doesn’t account for flash-flood sheet flow coming off surrounding washes and neighboring lots. The paver itself is usually fine. The base and joint system is what fails. Fixing it means re-grading and re-sanding, not just topping off the joints. Call (844) 588-0072 for a Boulder City estimate and an honest read on repair versus replace.
Can Tremron pavers go over my original dam-era concrete? Usually not directly. The shallow original aprons common on historic-district lots often can’t carry the base depth a proper paver install needs. In most cases we pull the affected field and reconstruct the base before laying pavers. We’ll tell you plainly at the estimate what your specific lot needs.
What’s the difference between Olde Towne and Mega Olde Towne pavers? Both are Tremron paver lines, and the difference is largely scale and profile. Mega Olde Towne runs larger and tends to suit driveways and larger patios, while Olde Towne works well on tighter historic-core lots with smaller footprints. Matching an existing run to the right line during repair matters.
Does the historic-preservation overlay affect my paver driveway or patio project? It can. Boulder City runs design review through a small municipal building department with a historic-preservation overlay, so changes visible from the street in the historic core can trigger review. We plan for that in the written scope so it doesn’t become a surprise mid-job. Call (844) 588-0072 if you’re unsure whether your lot falls under it.
Service Areas Near Boulder City
We also work Tremron projects across the surrounding region, including Henderson, Whitney, Las Vegas, Summerlin, and Spring Valley. If you’re outside Boulder City and want to know whether the same base and grading considerations apply to your lot, call and we’ll tell you straight.
Book Your Tremron Service in Boulder City Today
Get a written price before any work starts, a crew that shows up when we said we would, and a 365-Day Done Right Promise that covers the finished job for a full year. Boulder City service area estimates are free. Call (844) 588-0072.
Written by the team at Bradford Remodeling Co Summerlin.












