







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Summerlin Homeowners Choose Therma-Tru Construction
Bradford Remodeling Co Summerlin provides independent Therma-Tru construction service across the Summerlin valley, from hinge and lockset adjustments to full entry and patio door replacement. We’re not authorized or sponsored by Therma-Tru, but we’ve worked on hundreds of their door systems, so we know the model-specific wear points, the part numbers, and the failure modes that show up again and again. What sets our Therma-Tru work apart is diagnosis: we figure out whether the door needs a $40 hinge set or a new slab before we quote anything, and you get that price in writing before a tool comes out.

Summerlin’s housing stock runs from 1990s Mediterranean stucco-and-tile tract homes to custom builds in TPC Summerlin, which means Therma-Tru doors here span three decades of model years and every possible state of wear. Call (844) 588-0072 and a live person picks up.
Why Trust Bradford Remodeling Co Summerlin for Your Therma-Tru Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent on Therma-Tru doors specifically: Smooth-Star, Fiber-Classic, Classic-Craft, and the hinged and sliding patio systems. That matters because Therma-Tru changed its hinge prep, sill construction, and edge-sealing methods across model generations, and a technician who doesn’t know the difference will drill into a slab where the fiberglass is thin and crack it.
We source OEM-compatible parts and work warranty-safe. That means we don’t modify a door’s structural components or finish in ways that would void a manufacturer warranty, and we document what we did and why so you have a record. Every completed job carries the 365-Day Done Right Promise: if our work fails within a year, we come back and correct it at no charge. Every price is written before work starts, no numbers that move at the door. Background-checked, uniformed technicians show up on every Summerlin job, and you’ll know who’s coming before they arrive.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Summerlin
Desert heat and intense UV do things to fiberglass doors that a manufacturer’s generic care guide won’t prepare you for. Here’s what we actually see on Summerlin doors:
- Hairline cracks and star fractures around hinges and locksets on Smooth-Star and Fiber-Classic slabs. Fiberglass skins expand and contract with temperature swings, and the fastener points concentrate that stress. Impact from a swung-open door or a delivery dolly turns a hairline into a star fracture fast. Left alone, moisture gets behind the skin.
- Wood-edge rot on Classic-Craft doors, especially south- and west-facing entries. Classic-Craft uses an engineered wood edge, and when the factory edge seal fails after years of 110°F+ summers, moisture wicks into the grain. The bottom rail and the lock-side stile go first.
- Delamination and bubbling of the door skin from prolonged UV exposure. Summerlin sits above 3,000 feet against the Spring Mountains, and the UV load at that elevation is unforgiving. When the factory finish breaks down, the fiberglass skin separates from its substrate.
- Misaligned or sagging hinged patio doors. Hinge wear plus the slight foundation settling common on west-side expansive clay soils throws the door out of square in the jamb. The result is drafts, a hard latch, and a door that drags on the threshold.
- Failed sweeps, sills, and weatherstripping on sliding patio doors. These wear items take the brunt of dust and heat. When they fail, you get daylight at the meeting stile and grit tracked into the track.
Therma-Tru Parts & Our Repair-vs-Replace Approach

We source OEM Therma-Tru replacement parts whenever they’re available, because original fit and finish matter on a door that has to seal. When OEM parts are discontinued or priced out of proportion to the repair, we use high-quality aftermarket components for common wear items like hinges, sweeps, and weatherstripping. Those parts do the same job, and we’ll tell you which one you’re getting and why.
We don’t stock Therma-Tru parts locally. Each job is sourced to the specific model and serial, which is slower than grabbing whatever’s on a shelf but means the part actually fits. And we give honest repair-or-replace advice based on the door’s age and the extent of damage, not on selling you a new door. A cracked skin at one hinge can often be repaired and refinished. A Classic-Craft with rot through the bottom rail usually can’t. Call (844) 588-0072 for a free estimate and a straight answer on which one you’re looking at.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We identify the model line, check the slab, edges, hinges, lockset, sill, and frame for square. On patio doors we check the track, rollers, and meeting stile. You get a written scope and price before anything else happens.
- 2
Repair or install. Hinge replacement, frame re-shimming, edge-seal repair, skin repair and refinish, sweep and weatherstrip replacement, or full door and frame replacement with correct flashing and sill pan detailing.
- 3
Test. We operate the door through its full swing or slide, check for daylight and air gaps, confirm the latch and deadbolt engage cleanly, and verify the seal against a water test where relevant.
- 4
Written guarantee. You get the 365-Day Done Right Promise in hand: if our work fails within a year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Summerlin
We service and install the Therma-Tru lines most common in Summerlin homes: Smooth-Star fiberglass entry doors, Fiber-Classic fiberglass doors, the Classic-Craft collection, and Therma-Tru hinged and sliding patio door systems. That covers everything from a single hinge swap on a 1990s tract-home entry to a full replacement on a Summerlin West custom build. If you’re not sure which line you have, the model and serial are usually on a label on the door edge or the frame head, and we can identify it from a photo.
We Also Service These Brands
Bradford Remodeling Co Summerlin isn’t a single-brand shop. Alongside Therma-Tru doors, we work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler and Moen fixtures, among others. That matters when a door replacement turns into a full entry remodel, or when a kitchen or bath project needs the door, cabinet, and surface work handled by one crew that documents its specifications. We also handle full kitchen remodeling, full bathroom remodeling, and roof repair.
FAQs – Therma-Tru Construction Service in Summerlin

No. We’re an independent Therma-Tru service provider, not authorized, sponsored, or endorsed by Therma-Tru. We work on their products because we know them well, not because we carry a manufacturer badge. Call (844) 588-0072 for a free estimate.
We use OEM Therma-Tru parts whenever they’re available, and high-quality aftermarket components for common wear items like hinges, sweeps, and weatherstripping when OEM parts are discontinued or cost-prohibitive. We tell you which one you’re getting before we order. Call (844) 588-0072 to talk through your door.
Most single-door repairs, like hinge replacement, re-shimming, or weatherstripping, are done in a few hours. Skin repair and refinish usually runs a day or two depending on cure time. A full door and frame replacement is typically a one- to two-day job once the correct unit is sourced. Call (844) 588-0072 for a written timeline on your specific door.
We cover Smooth-Star, Fiber-Classic, the Classic-Craft collection, and Therma-Tru hinged and sliding patio door systems. If you’re unsure which line you have, send us a photo of the door edge or frame label and we’ll identify it. Call (844) 588-0072 for a free estimate.
Not if it’s done correctly. We work warranty-safe: we don’t modify structural components or finishes in ways that would void a manufacturer warranty, and we document what we did. If a repair could affect your warranty, we’ll tell you before we start. Call (844) 588-0072 to discuss your situation.
Door repairs typically run a few hundred dollars for hinge, sweep, and weatherstrip work, while skin repair and refinish cost more, and a full entry or patio door replacement is a larger project. Here are our written price ranges for related work in Summerlin:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 588-0072 for an exact quote on your Therma-Tru door. Estimates are free and the price is written before work starts.
Often it can be repaired. A hairline or star fracture around a hinge or lockset is usually fixable with proper skin repair and refinish, as long as moisture hasn’t gotten behind the skin. If the crack has spread across the panel or the core is soft, replacement is the honest call. We’ll tell you which one you’re looking at after we see it. Call (844) 588-0072 for a free estimate.
The usual cause is worn rollers plus a track that’s filled with grit and out of alignment, often combined with hinge or frame settling. The fix is typically new rollers, a cleaned and adjusted track, and fresh weatherstripping at the meeting stile. Call (844) 588-0072 for a free estimate.
Summerlin’s 110°F+ summers and high-elevation UV load break down factory finishes faster than in cooler climates, which lets moisture into fiberglass skins and accelerates delamination and edge rot. South- and west-facing doors take the worst of it. A door that would last 15 years in a mild climate may need finish attention here in half that time. Call (844) 588-0072 to schedule an inspection.
Sometimes, but it depends on how far the rot has spread. Surface rot on the edge can often be cut out, treated, and sealed. Rot that has reached the bottom rail’s core or the lock-side stile usually means the door needs replacement. A qualified local pro would assess the extent before recommending either. Call (844) 588-0072 for a free estimate.
Book Your Therma-Tru Service in Summerlin, NV
Whether your Therma-Tru door needs a hinge adjustment, a skin repair, or a full replacement, Bradford Remodeling Co Summerlin gives you a written price before work starts and backs it with the 365-Day Done Right Promise. Call (844) 588-0072 for a free estimate. A live person answers, day or night.
Written by the team at Bradford Remodeling Co Summerlin.












